|
Item category pH/ORP/Conduct - Controllers/ Transmitters/ Monitors
|
 Description The +GF+ SIGNET 9040 ORP Controller provides reliable control of oxidizing and reducing reactions. Multiple output options allow for alarming, data logging, or simple process recording. Security features prevent unwanted tampering.. DescriptionFeatures On-off or dual proportional control Up to four relays Up to two analog outputs Applications Effluent pretreatment Water and waste treatment systems Groundwater remediation Resource reclamation Cyanide destruction Metals recovery and removal Water sanitation systems Disinfection Compatibility 2720 pH/ORP Pre-amp/Sensor System Technical Data Operating Range: ORP: +/-1000 mV's Power Requirements: 17 to 30 VDC @ 0.5A max. and/or 90 to 132 VAC or 180 to 264 VAC, 50-60 Hz LCD Display: 4-1/2 digit alphanumeric (upper) 8 digit alphanumeric (lower); 4 relay status annunciators Current Output: 4 to 20 mA, isolated or non-isolated, internally powered (2 of 3 card slots avail.) Loop impedance: 425 ohm max. Accuracy: +/-0.5% of full scale Voltage Output: 0 to 5 or 0 to 10 VDC, isolated or non-isolated Min. load resistance: 1 k ohm Output isolation: 500 VDC to earth ground (isolated version only) Alarm Contacts: Two SPDT relays: 5A @ 30 VDC or 250 VAC max. (2 of 3 card slots available) Hi/Lo programmable with adjustable hysteresis Two SPST relays: 5A @ 30 VDC or 250 VAC max. Hi/Lo/Pulse programmable with adj. hysteresis or pulse rate Operating Cond.: Operating temperature: 32 to 130 degrees F Relative humidity: 0 to 95%, non-condensing Accuracy: ORP: +/-0.1% of full scale Materials: Enclosure: ABS Plastic, NEMA 4X/IP65 Panel and case gasket: Neoprene Accessories 3-9000.450-1 0/4 to 20 mA non-iso output card 3-9000.450-2 0 to 5 VDC non-iso output card 3-9000.450-3 0 to 10 VDC non-iso output card 3-9000.460-1 0/4 to 20 mA iso output card 3-9000.460-2 0 to 5 VDC iso output card 3-9000.460-3 0 to 10 VDC iso output card 3-9000.440-1 2 relay card 3-9000.400-1 Dual Proportional relay card 3-5000.395 Splashproof Back Cover Kit 3-5000.598 Mounting Bracket 3-5000.399 Retrofit Adapter Kit 3-9000.392 Liquid Tight Connector Kit Please call 1-800 783 6664 for accessories Model 3-9040.111 ORP Controller, 90 to 132 VAC 3.9040.121 ORP Controller, 180 to 264 VAC Please select from the drop down menu below © 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |