|
Item category Digital Panel Indicators
|
 Features "Fast Cal" Calibration Transducer Excitation Supply Max/ Min Memory Isolated Analogue Output Two Logic Inputs Transducer Health "Test" Function Adjustable Display Resolution Universal Power Supply Serial Communications Dual Alarm Relays (T254 Only) The Tracker 250 series of digital panel indicators are designed specifically for use with Melt Pressure Transducers. Data Track's "Fast Cal" feature provides a fast and simple method of calibrating an indicator, using the transducers internal calibration resistor. Re-calibration can be undertaken whenever the transducer is at ambient pressure (i.e. has no pressure applied to it). Should the transducer be faulty, or incorrectly wired, this will be indicated during the calibration procedure. Both the Tracker 253 and 254 have a five digit display and transducer supply as well as many advanced software features. In addition, both models are fitted with an analogue output and an RS 422 / 485 communications interface to allow connection to data loggers, chart recorders, PLCs and computers. The Tracker 254 also has two alarm relays, both with volt free change over contacts. The displayed pressure can be in psi, bar, MPa or any other engineering units. A special "test" function allows the transducer wiring and calibration to be checked. Model T 253 T 254 with 2 relays T 255 with quad TTL outputs Please select from the drop down menu below © 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |