|
Item category Flow Measurement - Sensors
|
 Features Click here to view full-pdf specification sheets • Two flow ranges available • 0..11 to 2.6 lpm (0.03 to 0.7 gpm) •1.13 to 12.11 lpm (0.3 to 3.2 gpm) • Simple Mounting •1/4 in.NPT or ISO threads for simple pipe or tubing connection • Measures clear and dark liquids Applications •Coolant Flow •Dosing •Batch dispensing •Not recommended for strong oxidizers Options  Click here to purchase Options Description The +GF+SIGNET 2000 MicroFlow Sensor is constructed from PPS which provides high material strength.The 2000 offers two flow ranges starting at 0.03 or 0.7 gpm,for clean process liquids,regardless of fluid color or opacity. This sensor can be connected to flexible tubing or rigid pipe,and uses standard hardware for mounting.Only one moving part and a low pressure drop across the sensor reduces operating costs and maintenance requirements. Technical Features a)Strong,compact PPS body. b)Fully-encapsulated electronics. c)Simple mount with three #6 or M3 screws. d)Simple access to rotor for service. Technical Data General Flow rate range: -11 &-12 version:0.11 to 2.6 lpm (0.03 to 0.7 gpm) -21 &-22 version:1.13 to 12.11 lpm (0.3 to 3.2 gpm) Linearity:±1.2%of full range Repeatability:± 0.5%of full range Connections:1/4 in.NPT (male)or ISO 7/1 -R1/4 (male) Cable length:8 m (25 ft.),can splice up to 300 m (1000 ft.)max. Cable type:2-conductor twisted pair w/shield Wetted Materials Sensor body and cover:40%glass filled Polyphenylene Sulfide Rotor:PEEK,natural,unfilled Rotor O-ring:Viton ® Cover O-ring:Viton ® Max.pressure/temperature: 0 to 80 °C (32 to 176 °F)@5.5 bar (80 psi)max. Electrical Power:5 to 24 VDC @10 mA max.from +GF+SIGNET instrument Output type:Open-collector NPN transistor, 10 mA max.sink Standards and Approvals •CE •Manufactured under ISO 9001 Engineering Specifications •The sensor shall be compatible with clean process liquids regardless of fluid color. •The sensor shall operate with a power input of 5 to 24 VDC @10 mA maximum from the indicating instrument. •Output shall be via a twisted pair,foil-shielded cable with drain wire.Supplied cable shall be at least 7.6 m (25 ft)long,with a maximum allowable length of 300 m (1000 ft). •Linearity of the output signal with respect to flow rate shall be ±1.2%of full range. •Measurement repeatability shall be ± 0.5%of full range. •The sensor shall be available in versions that accommodate nominal flow rates from 0.03 to 0.7 gpm or from 0.3 to 3.2 gpm. •The sensor body shall be made of 40%glass-filled polyphenylene sulfide that shall accommodate up to 80 psi@0 to 80 °C (32 to 176 °F). •The sensor body shall be constructed to allow easy access for inspecting and cleaning internal mechanical parts without exposing electronic components. •Sensor rotor shall be made of PEEK. •The sensor shall provide 0.25 in.NPT male fittings or ISO 7/1 R male fittings for attachment to flexible tubing or rigid pipe. •The sensor shall meet appropriate CE standards. •The flow sensor shall be +GF+SIGNET,Model 2000 MicroFlow. Accessories 3-2000.390 159 000 248 Replacement rotor kit 1220-0029 198 820 049 Cover O-ring 2450-0620 198 820 051 Cover screw 5523-0222 159 000 392 Cable,per foot Click here to purchase Accessories on line Model / Ordering Information 3-2000-11 198 822 000 Micro Flow Sensor 0.25 in.NPT 0.03 to 0.7 gpm (0.11 to 2.61 lpm) 3-2000-12 198 822 001 Micro Flow Sensor ISO 7/1-R1/4 0.03 to 0.7 gpm (0.11 to 2.61 lpm) 3-2000-21 198 822 002 Micro Flow Sensor 0.25 in.NPT 0.3 to 3.2 gpm (1 .13 to 12.11 lpm) 3-2000-22 198 822 003 Micro Flow Sensor ISO 7/1-R1/4 0.3 to 3.2 gpm (1 .13 to 12.11 lpm) Please call for any items not listed Please select from the drop down menu below © 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |