|
Item category Flow Measurement - Sensors
|
 Description Click here to view full-pdf specification sheets The +GF+ SIGNET 525 Metalex Flow Sensor offers the added strength of an all stainless steel construction with insertion paddlewheel technology. The result is a highly reliable sensor resistant to extreme pressures and temperatures. The 525 is compatible with all +GF+ SIGNET powered flow instruments and offers easy installation. The sensor can be installed up to 200 feet from the meter or controller without signal amplification. Features Handles pressures to 1500 psi Operates in temperatures to 300°F FM and CSA approved for explosion proof environments Rugged stainless steel construction Applications Heavy industry High pressure High temperature Compatibility 5100, 5500 Flow Monitors 8512 Flow Transmitter 5600 Batch Controller 8540 Pump Pulser 9010 Flow Controller Click here to purchase Options Technical Data Output Signal: 80 mV p-p per fps nominal Output Frequency: 11 Hz per fps nominal Operating Range: 1.6 to 20 fps Pressure/Temperature: 1500 psi @ 300 degrees F Power Requirements: none Pipe Size Range: 0.5 to 12 in. Repeatability: +/- 0.5% of full range Linearity: 1% of full range Materials: Body: ACI type CF-8M (316 SS) per ASTM A351 Shaft: Tungsten Carbide Retainer: 316 SS Rotor: CD4MCu Bearings: Fluoroloy "B" Cable Type: Twisted pair with foil shield Cable Length: 25 ft. (200 ft. max.) Quality Standards: CE, FM (Class I, II, III/Div. 1/Groups A-G) Engineering Specifications •The flow sensor shall use a four-blade,open-cell rotor design using insertion paddlewheel technology. •The sensor shall be available in models usable in pipe sizes from 0.5 to 12 in.when combined with appropriate installation fittings. •The sensor shall require no electrical power. •The sensor shall provide an output signal of 80 mV p-p per ft/s nominal at a frequency of 12 Hz per ft/s nominal from 1.6 to 2.0 ft/s. •Output shall be via a twisted pair,foil-shielded cable with drain wire.Supplied cable shall be at least 7.6m (25 ft)long,with a maximum allowable length of 61 m (200 ft). •Linearity of the output signal with respect to flow rate shall be ±1%of full scale. •Measurement repeatability shall be ±0.5%of full scale. •The operating range of the sensor shall accomodate nominal flow rates from 0.5 to 6 m/s (1.6 to 20 ft/s). •The sensor body shall be made of ACI type CF-8M (316 SS)per ASTM A 351 that shall accomodate up to 103 bar (1500)psi @149 °C (300 °F)with appropriate installation fitting. •Shaft shall be Tungsten Carbide.Retainers shall be made of 316SS.Rotor shall be made of CD4MCu alloy. •The sensor shall attach to a pipe via a variety of insertion-style installation fittings supplied by the flow sensor manufacturer. •The sensor shall be equipped with 0.5 in.NPT female threaded conduit connection. •The sensor shall meet appropriate CE,FM standards for Classes I,II and III,Division 1/Groups A-G and CSA. •The flow sensor shall be +GF +SIGNET,Model 525 Metalex. Accessories Mfr.Part No -.Code - Description P31934 159 000 466 Conduit Cap P51589 159 000 476 Conduit Adapter Kit P52618 159 000 493 Gasket P52628 159 000 504 Fitting cap kit (cap and gasket) P52509 198 801 501 Rotor kit (rotors,stainless steel pin,bearings,retainers) P52509-2 159 000 480 Rotor kit (rotors,tungsten carbide pin,bearings,retainers) P52504-1 198 801 500 Rotor Shaft,Stainless steel (optional) P52504-2 198 820 023 Rotor Shaft,Tungsten Carbide (standard) P52503 198 820 013 Bearing,Fluoroloy B P52527 159 000 481 Retainers,Stainless steel 5523-3222 159 000 393 Cable,per foot Click here to purchase Accessories on line Model P525-1 0.5 to 1 in mini-tap 300 degrees F 1500 psi P525-2 1.25 to 12 in. mini-tap 300 degrees F 1500 psi P525-3 2 to 12 in. saddle 150 degrees F 300 psi Please call for any items not listed Please select from the drop down menu below © 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |