|
Item category Temperature & Pressure Calibrators
|
 Features Measure loop current (0-20 mA, 4-20 mA) signals with 0.025% accuracy and 1 mA resolution Measure voltage output process signals from PLCs, transmitters Source or simulate 24 mA loop current Source voltage to 100 mV or 10V 24V loop supply with simultaneous current measurement Function Specifications Loop Supply Range: 24 V dc Resolution: N/A Accuracy: +/- 10% Note: Drive; 20 mA into 1000 W for battery >6.8V; 700 W for battery 5.8 to 6.8 V Measure/simulate mA/% of span Range: 0 to 24 mA (-25% to 125%) Resolution: 0.001 mA Accuracy: 0.015% + 2 counts Note: Sink (simulate transmitter) Display mA or % of span Measure/simulate mV Range: 0 to 100 mV Resolution: 0.01 mV Accuracy: 0.02% + 2 counts Measure/simulate V Range: 0 to 10 V Resolution: 0.001 V Accuracy: 0.02% + 2 counts General Specifications Operating temperature: -10șC to 55șC Non-operating temperature: -40șC to 60șC Relative humidity (% RH operating without condensation): 95% (10șC to 30șC); 75% (30șC to 40șC); 45% (40șC to 50șC); 35% (50șC to 55șC) Operating altitude: 3,000m max Vibration: Random, 2g, 5-500 Hz Shock: 1m drop test Safety: CSA C22.2 No. 1010.1:1992 Power: Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline Size (with holster): 201 mm L x 98mm W x 52 mm D (7.93 in X 3.86 in x 2.06 in) Weight (with holster): Approx. 600g (21 oz) Size (without holster): 187 mm L x 87mm W x 32 mm D (7.35 in X 3.41 in x 1.25 in) Weight (without holster): Approx. 330g (12 oz) Display: Clear, 5 digit liquid crystal Warranty: 3 years Accessories Please Call Please Call Click here to view calibrator accessories-pdf Model Fluke-715 Volt/mA Calibrator. Calibrator includes: C81Y Protective Yellow Holster with Flex-StandTM, Test Leads and Alligator Clips, single 9V alkaline battery, Instructions Sheet (14 languages). Please select from the drop down menu below © 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |