|
Item category Temperature & Pressure Calibrators
|
 Features The Fluke 710 Series Process Calibrators offer a clear new choice in single-function calibrators. These hand-held calibrators deliver outstanding performance, durability and reliability. Offered in the rugged Fluke 80 Series DMM package, the calibrators are compact, lightweight, and easy to carry. With a push button interface similar to the multifunction Fluke 740 Series Documenting Process Calibrators, the 710s are easy to use. Each calibrator is EMI tolerant, dust and splash resistant, and features a removable battery door for quick battery changes. Each calibrator will measure or source one parameter at a time. Additionally, the 713, 716, 717 and 718 will simultaneously measure pressure and mA. The 715, 716, 717 and 718 will deliver 24 volt loop supply while measuring mA. The newest members of the 710 family, the 716, 717 and 718 Pressure Calibrators, present cost-effective solutions for highly accurate pressure measurements over a wide range of temperatures. These new calibrators connect with any of the 27 Fluke 700Pxx Pressure Modules to address a wide variety of gage, differential, absolute, vacuum, and dual (compound) pressure applications. The Fluke 716 serves as a readout device for Pressure Modules. Fluke 717 and 718 can address the majority of applications with their internal sensors, or can connect to a Pressure Module to address more varied applications. Fluke 713 30G/100G Pressure Calibrators Features at a Glance Measure pressure, 0.05% of full scale Measure mA, 0.025% Calibrate I/P transmitter with simultaneous pressure and current measurement Select eleven different engineering units Compatible with non-corrosive gases and liquids Zero, min, max, hold functions 1/8 NPT female pressure fitting Two shrouded banana jacks Function Specifications Measure Pressure (internal sensor) Over Pressure 3xFS (713 30G only) Range: -12 to 30 psi (-83 to 207 kPa) Resolution: 0.001 psi (0.01 kPa) Accuracy: 0.05% full scale Note: Gasses/liquids (non-corrosive) Zero, Min, Max, Hold, Damp Measure Pressure (internal sensor) Over Range: -12 to 100 psi (-83 to 690 kPa) Pressure 3xFS (713 100G only) Resolution: 0.01 psi (0.1 kPa) Accuracy: 0.05% of full scale Note: Gasses/liquids (non-corrosive) Zero, Min, Max, Hold, Damp Measure mA Range: 0 to 24 mA Resolution: 0.001 mA Accuracy: 0.025% + 1 count General Specifications Operating temperature: -10ºC to 55ºC Non-operating temperature: -40ºC to 60ºC Relative humidity (% RH operating without condensation): 95% (10ºC to 30ºC); 75% (30ºC to 40ºC); 45% (40ºC to 50ºC); 35% (50ºC to 55ºC) Operating altitude: 3,000m max Vibration: Random, 2g, 5-500 Hz Shock: 1m drop test Safety: CSA C22.2 No. 1010.1:1992 Power: Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline Size (with holster): 201 mm L x 98mm W x 52 mm D (7.93 in X 3.86 in x 2.06 in) Weight (with holster): Approx. 600g (21 oz) Size (without holster): 187 mm L x 87mm W x 32 mm D (7.35 in X 3.41 in x 1.25 in) Weight (without holster): Approx. 330g (12 oz) Display: Clear, 5 digit liquid crystal Warranty: 3 years Fluke 716 Pressure Calibrator Features at a Glance Measure pressure to 10,000 psi/69 mPa using one of 29 Fluke 700 Pxx Pressure Modules Measure mA with 0.025% accuracy and 0.001 mA resolution, while sourcing 24V loop power Calibrate P/I or I/P transmitter with simultaneous pressure and current measurement Select from eleven different engineering units Zero, min, max, and hold functions Function Specifications Measure Pressure (with Pressure Modules) Over pressure per pressure module specs Range: 28 pressure modules, 1.0 in. H20 / 0.25 kPa to 10,000 psi / 69 Mpa Resolution: To 0.0001 psi, per Pressure Module specs Accuracy: To 0.05% of full span, per Pressure Module specs Note: Media compatibility per Pressure Module Specs, Zero, Min, Max, Hold, Damp Measure mA Range: 0 to 24 mA Resolution: 0.001 mA Accuracy: 0.025% + 1 count Loop Supply Range: 24 V dc Resolution: N/A Accuracy: +/- 10% Note: Drive; 20 mA into 1000 W for battery >6.8V; 700 W for battery 5.8 to 6.8 V General Specifications Operating temperature -10ºC to 55ºC Non-operating temperature -40ºC to 60ºC Relative humidity (% RH operating without condensation): 95% (10ºC to 30ºC); 75% (30ºC to 40ºC); 45% (40ºC to 50ºC); 35% (50ºC to 55ºC) Operating altitude 3,000m max Vibration Random, 2g, 5-500 Hz Shock 1m drop test Safety CSA C22.2 No. 1010.1:1992 Power Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline Size (with holster) 201 mm L x 98mm W x 52 mm D (7.93 in X 3.86 in x 2.06 in) Weight (with holster) Approx. 600g (21 oz) Size (without holster) 187 mm L x 87mm W x 32 mm D (7.35 in X 3.41 in x 1.25 in) Weight (without holster) Approx. 330g (12 oz) Display Clear, 5 digit liquid crystal Warranty 3 years Fluke 717 30G Pressure Calibrator Features at a Glance Measure pressure, 0.05% of full scale with internal 30 psig sensor 1/8 NPT pressure fitting Compatible with non-corrosive Gases and liquids Measure pressure to 10,000 psi/69 mPa using one of 27 Fluke 700Pxx Pressure Modules Measure mA with 0.025% accuracy and 0.001 mA resolution, while sourcing 24V loop power Function Specifications Measure Pressure (internal sensor) Over Pressure 3xFS (717 30G only) Range: -12 to 30 psi (-83 to 207 kPa) Resolution: 0.001 psi (0.01 kPa) Accuracy: 0.05% full scale Note: Gasses/liquids (non-corrosive) Zero, Min, Max, Hold, Damp Measure Pressure (with Pressure Modules) Over pressure per pressure module specs Range: 28 pressure modules, 1.0 in. H20 / 0.25 kPa to 10,000 psi / 69 Mpa Resolution: To 0.0001 psi, per Pressure Module specs Accuracy: To 0.05% of full span, per Pressure Module specs Note: Media compatibility per Pressure Module Specs, Zero, Min, Max, Hold, Damp Measure mA Range: 0 to 24 mA Resolution: 0.001 mA Accuracy: 0.025% + 1 count Loop Supply Range: 24 V dc Resolution: N/A Accuracy: +/- 10% Note: Drive; 20 mA into 1000 W for battery >6.8V; 700 W for battery 5.8 to 6.8 V General Specifications Operating temperature -10ºC to 55ºC Non-operating temperature -40ºC to 60ºC Relative humidity (% RH operating without condensation): 95% (10ºC to 30ºC); 75% (30ºC to 40ºC); 45% (40ºC to 50ºC); 35% (50ºC to 55ºC) Operating altitude 3,000m max Vibration Random, 2g, 5-500 Hz Shock 1m drop test Safety CSA C22.2 No. 1010.1:1992 Power Single 9V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline Size (with holster) 201 mm L x 98mm W x 52 mm D (7.93 in X 3.86 in x 2.06 in) Weight (with holster) Approx. 600g (21 oz) Size (without holster) 187 mm L x 87mm W x 32 mm D (7.35 in X 3.41 in x 1.25 in) Weight (without holster) Approx. 330g (12 oz) Display Clear, 5 digit liquid crystal Warranty 3 years Fluke 718 30G and Fluke 718 100G Pressure Calibrators Features at a Glance The Fluke 718 Pressure Calibrator offers a new approach to pressure calibration. A complete, self-contained calibration solution, the 718 offers: Built-in pressure / vacuum hand pump, with vernier and bleed valve. Pressure measurement to 0.05% of full span, using an internal pressure sensor. Pressure measurement to 10,000 psi / 700 bar using any of the Fluke-700Pxx Pressure Modules. Wide range of selectable measurement units for pressure. Current measurement with 0.025% accuracy and 0.001 mA resolution. 24 volt loop power supply. Min-Max Hold functions. Compact size and weight. Simple, push-button user interface. Rugged and reliable, ideal for field use. Function Specifications Measure Pressure (internal sensor) Over Pressure 3xFS (718 30G only) * Range: -12 to 30 psi (-83 to 207 kPa) Resolution: 0.001 psi (0.01 kPa) Accuracy: 0.05% full scale For use with non-corrosive gasses Zero, Min, Max, Hold, Damp Measure Pressure (internal sensor) Over Pressure 3xFS (718 100G only) Range: -12 to 100 psi (-83 to 690 kPa) Resolution: 0.01 psi (0.1 kPa) Accuracy: 0.05% of full scale For use with non-corrosive gasses Zero, Min, Max, Hold, Damp Measure Pressure (with Pressure Modules) Over pressure per pressure module specs Range: 28 pressure modules, 1.0 in. H20 / 0.25 kPa to 10,000 psi / 69 Mpa Resolution: To 0.0001 psi, per Pressure Module specs Accuracy: To 0.05% of full span, per Pressure Module specs Note: Media compatibility per Pressure Module Specs, Zero, Min, Max, Hold, Damp Source Pressure, built in pump Range: -11 psig to full scale Resolution: N/A Accuracy: N/A Measure mA Range: 0 to 24 mA Resolution: 0.001 mA Accuracy: 0.025% + 1 count Loop Supply Range: 24 V dc Resolution: N/A Accuracy: +/- 10% Note: Drive; 20 mA into 1000 W for battery >6.8V; 700 W for battery 5.8 to 6.8 V *Supported Pressure Units; psi, in. H20 (4°C), in. H20 (20°C), cm H20 (4°C), cm H20 (20°C), bar, mbar, kPa, inHg, mmHg, kg/cm General Specifications Operating temperature: -10ºC to 55ºC Non-operating temperature: -40ºC to 60ºC Relative humidity (% RH operating without condensation): 95% (10ºC to 30ºC); 75% (30ºC to 40ºC); 45% (40ºC to 50ºC); 35% (50ºC to 55ºC) Operating altitude: 3,000m max Vibration: Random, 2g, 5-500 Hz Shock: 1m drop test Safety: CSA C22.2 No. 1010.1:1992 Power: Single 9V battery ANSI/NEDA 1604A or IEC 6LR61 Size (with holster): 201 mm L x 98mm W x 52 mm D (7.93 in X 3.86 in x 2.06 in) Weight (with holster): Approx. 600g (21 oz) Size (without holster): 187 mm L x 87mm W x 32 mm D (7.35 in X 3.41 in x 1.25 in) Weight (without holster): Approx. 330g (12 oz) Display: Clear, 5 digit liquid crystal Warranty: 3 years Accessories Please Call Click here to view calibrator accessories-pdf Model Fluke-713 30G 30G Pressure Calibrator. Calibrator includes: C81Y Protective Yellow Holster with Flex-StandTM, Test Leads and Alligator Clips, single 9V alkaline battery, Instructions Sheet (14 languages). Fluke-713 100G 100G Pressure Calibrator. Calibrator includes: C81Y Protective Yellow Holster with Flex-StandTM, Test Leads and Alligator Clips, single 9V alkaline battery, Instructions Sheet (14 languages). Fluke-716 Pressure Calibrators. Calibrator includes: C81Y Protective Yellow Holster with Flex-StandTM, Test Leads and Alligator Clips, single 9V alkaline battery, Instructions Sheet (14 languages). Fluke-717 30G Pressure Calibrator. Calibrator includes: C81Y Protective Yellow Holster with Flex-StandTM, Test Leads and Alligator Clips, single 9V alkaline battery, Instructions Sheet (14 languages). Fluke-718 30G Pressure Calibrator includes: C81Y Protective Yellow Holster with Flex-StandTM, Test Leads and Alligator Clips, single 9V alkaline battery, Instructions Sheet (14 languages), CE, CSA, UL and TUV markings. Fluke-718 100G Pressure Calibrator includes: C81Y Protective Yellow Holster with Flex-StandTM, Test Leads and Alligator Clips, single 9V alkaline battery, Instructions Sheet (14 languages), CE, CSA, UL and TUV markings. Please select from the drop down menu below © 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |