|
Item category Remote Monitoring Equipment/ Data Loggers
|
 Features: The D118 is a fully-programmable, environmental monitoring system that offers extensive on-site and remote monitoring capability to computer rooms, equipment rooms, remote facilities, small businesses, greenhouses, farms and private homes. The D118 monitors temperature, Sound and Power Failure, additonal sensors are available. Designed for desktop or wall mounting, the D118 is simple to install, program and operate - no changes to standard electrical or telephone service are required. Once connected to a telephone line, the Sensaphone will respond to an alarm by dialing up to four seperate telephone numbers. When the call is answered, an "Alert Condition" message is delivered in digitized speech. The status of each monitored condition is readily obtained at the unit's installation site, or remotely by telephone. At the close of every status report, time is provided for listening to actual on-site sounds. Calls user at up to 4 locations - including beepers and pagers - if an alarm condition occurs (Model D119 calls user at up to 8 locations) User can call unit using any telephone to receive status reports or listen in Monitors: Temperature, sound, humidity, water and AC power failure (with optional sensors, see Accessories) User selectable inputs: Model D118 = 4; Model D119 = 8 Dials numbers in sequence until acknowledged Simple to install - no changes to standard electrical and phone service required Programmable security code access Local and remote enabling/disabling of all dial-out conditions AC powered with battery back-up Detailed Specifications Ambient Operating Conditions (body of unit): +32 to +120°F (0 to +50°C) and 0 to 90% RH (non-condensing) Approvals: NRTL listed for compliance with UL standard 1459 Battery Type: Six 1.5 volt "D" cell alkaline batteries (not included) for back-up power Dial Out: Pulse or tone dial out (default is tone) and stores up to four 32 digit numbers (including pauses, # and *) Dial In: Use any telephone to dial Sensaphone for voice simulated status report of listen in to monitored area Dimensions: 7.5" W x 2" x 8.5" D Telephone Interface: FCC approved RJ-11 plug-in modular connector with 6' cord Power Requirement: 120 VAC 60 Hz 15 W Ranges - Basic Unit Temperature: +32 to +120°F Sound: Adjusts to ambient -- excesses trip alarm Power: Lack of trips alarm (batteries required) Optional Sensors Remote Temperature Probe: -20 to +150°F Motion: Passive infra-red motion -- detects warm bodies Water: Detects presence of water of a horizontal surface Magnetic Reed: Where switch contact is broken Humidistat: When humidity exceeds or falls below set limit -- range 10 to 60% RH Sensors: Any of the optional sensors can be attached using 22 gauge wire. Sensors can be several hundred feet from unit as long as the total resistance of the circuit is not greater than 50 ohms. (External sensors can not be used if they supply any voltage or current to the D118 Sensaphone.) Weight: 4 lbs. (1.8 kg) Includes: Detailed Instruction Manual Accessories A117 Temp Alert (-30 to +130°F) $80 Notes: Multiple A117's opperate on a single contact A118 Remote Temperature Sensor (-20 to +150°F) $45 A119 Magnetic Reed Switch $20 A120 Passive Infra-Red Motion Detector $165 A121 Water Detection Sensor $145 A122 Humidistat (10-60% RH) $110 Click here to purchase accessories Models D118 Sensaphone Remote Monitoring System, 4 Contacts $450 D119 Sensaphone Remote Monitoring System, 8 Contacts $700 D120 Sensaphone Remote Monitoring System, 8 Contacts, With Data Logging $1500 Please select Model and additional accessories from the menu's below © 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |