|
Item category Universal Chart Recorders & Controllers
|
 Features: The Dickson ESX signal recorder offers the flexibility of a standardized input recorder that can be used for a wide variety of applications. The microprocessor-based instrument offers high accuracy, flexibility and many other features normally offered only on higher priced recorders. Remote sensing capability with powered voltage or current transmitters High/Low Alarms feature and display of Min/Max readings (no controller/relay functions) User selectable output ranges and recording times Two screw terminals on back of the instrument allows easy connection of the input transmitter Locking control keypad & door User calibration User selectable input/output ranges and recording times AC Power with battery back up Keyhole slots for wall mounting User selectable decimal point placement to create desired output range on the display Large digital display Large 8" diameter chart Detailed Specifications Accuracy: .3% full scale ±1 digit (recorder only) Ambient Operating Conditions: (recorder) +32 to +120°F (0 to +50°C), 0 to 90% RH (non-condensing) Power Supply: 120V AC Adapter, (other adapters available for international markets) use four "D" batteries for battery back up (not included) Alarms: Audio (90 decibel)/Visual and over current high and low alarms (warning mechanism, no controller/relay functions). Average Battery Life: 1-day recording mode = 2 months, 7-day = 3 months, 31-day = 4 months Average Response Time: 20 seconds full scale (depending on transmitter) Note: The ESX internally averages readings together. In battery mode the update rate is slowed to conserve power & since the unit takes 1 new reading per update the response is also slowed. Calibration: NIST Traceable to our RFL electrical signal generator Calibration Adjustment: User calibration (calibration best accomplished when used with transmitter that will be used) Calibration Kit: Not available for this model Chart Size: 8" diameter (20.3cm) Dimensions: 10.5" x 13.2" x 2.8" (26.7cm x 33.5cm x 7.1cm) Display Resolution: 0.001, 0.01, 0.1, or 1 depending on range selected Input Ranges: (User selectable) 0-20mA, 4-20mA, 0-5 Vdc, 1-5 Vdc Maximum Input Voltage: 5 volts (instrument records direct current-dc) Mounting: Free standing or wall mountable Output Ranges: (user selectable, inlcuding decimal point selectability) 0 to +10, 0 to +200, 0 to +45, -150 to +250 0 to +100, 0 to +2000, 0 to +500, -20 to +50 0 to +1000, 0 to +250, 0 to +60, -20 to +120 0 to +14, 0 to +30, +40 to +110, -30 to +50 0 to +150, 0 to +300, -.10 to +.10, -50 to +50 Recording Time: User selectable: 1, 7 and 31 day Transmitter Capability: Any self powered voltage or current transmitter with specified recorder input range. (Transmitter range & recorder output range should be the same) Caution: To connect a transmitter to the recorder. Locate the terminal block on the back of the recorder. Connect the positive wire of transmitter to positive terminal (left) of recorder and the negative wire of tranmitter to negative terminal (right) of recorder. Tighten screws in terminal block to hold in transmitter wires. It is important that the voltage/milliamp switch on recorder and dip switch #3 corresponds to the transmitter being used. Warranty: 1-year Weight: 3.5 lbs. without batteries (1.5 kg), 5 lbs. with batteries (2.2kg) Includes: Pen, Box of 60 (0 to +100/7 day) Charts, AC adapter and Instructions Accessories A709 Carrying Case $70 E100 One Year Extended Warranty $59 P222 Pens (6 Red) $30 R008 "D" Cell Battery (Qty 1) $2 Click here to purchase accessories Models ESX Universal Input Recorder $649 Please select Model and additional accessories from the menu's below © 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |