CATEGORY Humidity and Temperature Dataloggers MAIN MENU ....................................... |
...... |
Catalog:Humidity and Temperature Dataloggers 
Dickson Temperature or Humidity Loggers The Dickson Pro Series Data Loggers Scroll down to view information on the TP120, TX120, SP100, SX120. Then select the Model and accessories of your choice from the menu options at the bottom of this page The Dickson Pro Series Data Loggers continuously monitor unattended for months and Data can be stored and viewed on your PC. Taking data acquisition to the next level with 5-year battery life, data storage capacity of 32,512 samples and our best accuracy specifications. TP120 - Temperature & Humidity Data Logger with 5 Year Battery  Features The Dickson Pro Series Data Loggers take data acquisition to the next level with 5-year battery life, data storage capacity of 32,512 samples and our best accuracy specifications. The TP120 is a self-contained, temperture & humidity Data Logger equipped with internal sensors for recording temperature and humidity. User friendly DicksonWare software creates a graph of your data in seconds. DicksonWare features include complete customization of your graph, zooming, and viewing your data in tabular format. You can also view data from several loggers on a single graph enabling easy comparison of multiple sets of data. Transferring the data into documents or spreadsheets is a snap! Battery Operation - 5 year battery life Stores 32,512 Sample Points Temperature Range -40 to +176°F (-40 to +80°C) Humidity Range 0 to 95% RH (non-condensing) "Unit On" LED Indicator 2% RH Accuracy Detailed Specifications Temperature Range: -40 to +176°F, -40 to +80°C Temperature Sensor: Digital temperature sensor Temperature Accuracy:>±1.8°F(±1°C) over range +14 to +176°F (-10 to +80°C); ±3.6°F(±2°C) over range +14 to -40°F (-10 to -40°C) Humidity Range: 0 - 95% RH (non-condensing) Humidity Sensor: Monolithic Humidity Sensor Humidity Accuracy: ±2% at 40% RH and +73°F (+23°C) ±4% over range 0 to 95% RH at +41 to +122°F (5 to +50°C) Resolution:Internal Temperature Sensor: 0.1°F (0.1°C) Internal Humidity Sensor: 0.1% RH Power Source: Lithium CR-2477 3V (Factory Replaceable) Battery Life: 5 Years typical @ 1 minute sample intervals PC Software Features:Windows™ based, variable sample interval, data wrap-around, viewing data, graphing and zooming Data Capacity: Single Channel - 32,512 sample points Dual Channel - 16,256 sample points per Channel Sample Interval:Variable from 10 seconds to 24 hours in 10 sec increments Response Time:10 minutes to move 63% of full scale (temperature) and 15 minutes to move 63% of full scale (humidity) Download Time: 3 minutes, typical with logger full Power Status: LED - Flashes when full Ambient Operating Range: -40 to +176°F (-40 to +80°C) 0 -95% RH (non-condensing) Approvals:CE Dimensions: 3.13" x 2.14" x 0.87" (79mm x 54mm x 22mm) Memory: Non-volatile Calibration: User: Zero Pt w/SW400 Software; Factory: Zero Pt. and Span Enclosure: Polycarbonate Weight: 1.8 oz (49g) A015 - DicksonWare & Download Cable Specifications Software: Microsoft 95, 98, 2000 and NT compatible PC Requirements: PC w/386 or better micro processor, 4M RAM, 1 free COM (Serial) port, CD drive Version Required (Minimum): 5.0.14 Cable Type/Length: 9 pin male D-shell to male 2.5mm sterio plug, 6 feet long Computer Interface: RS-232 COM (Serial) port Note: A015 must accompany the initial purchase of the TP120 in order to operate. TX120 - Temperature & Humidity Data Logger - $139  Features The Dickson TX120 sets a new standard in affordable, accurate, and easy-to-use PC based recording. The TX120 is a compact, rugged, battery powered Logger capable of taking temperature and humidity readings just about anywhere. User friendly DicksonWare software creates a graph of your data in seconds. DicksonWare features include complete customization of your graph, zooming, and viewing your data in tabular format. You can also view data from several loggers on a single graph enabling easy comparison of multiple sets of data. Transferring the data into documents or spreadsheets is a snap! Ideal for accurate recording of temperature & humidity for quality control. Recorded temperature & humidity data is easly downloaded and intigrated into spreadsheets and documents Battery Operation - 1 Year battery life Stores 7,680 Sample Points Temperature Range -40 to +176°F (-40 to 80°C) Humidity Range 25% to 95% RH Delayed Start Capability Faster Downloading Detailed Specifications Temperature Range: -40 to +176°F (-40 to +80°C Temperature Accuracy: ±2.25°F (±1.25°C) over range +14 to 176°F (-10 to 80°C), -2.25, +7.65°F (-1, +3.5°C) over range 14 to -40°F (-10 to -40°C) Temperature Sensor: Internal digital temperaure sensor Humidity Range:25% to 95% RH (non-condensing) Humidity Accuracy: ±5% over 25 to 95% RH range at 77°F (+25°C) Humidity Sensor: Monolithic humidity sensor Ambient Operating Conditions: -40 to +176°F (-40 to +80°C); 0-95% RH non-condensing Power Source: 3V Lithium coin cell battery, approximately 1 year at 1 minute sampling (user replaceable) Power Status Indicator: LED - Flashes when sampling Data Capacity: Single channel operation: 7,680 sample points, Dual channel operation: 3,840 sample points (each channel) Sample Interval: Variable from 10 seconds to 24 hours in 10 sec increments Memory: Non-volatile (retains data even when battery is removed) Resolution: Temperature: 0.9°F (0.5°C); Humidity: 0.1% RH Calibratio: User: None; Factory: Zero Pt. Approvals: CE Enclosure: Polycarbonate Dimensions: 3.1" x 2.1" x 0.9" (79mm x 54mm x 22mm) Weight: 1.8 oz (49g) Response Time: Temperature: 10 minutes to move 63% of full scale, Humidity: 15 minutes to move 63% of full scale A015 - DicksonWare & Download Cable Specifications PC Software Features: Windows™ based, variable sample interval, data wrap-around, viewing data, graphing and zooming Software: Microsoft 95, 98, 2000 and NT compatible PC Requirements: PC w/386 or better micro processor, 4M RAM, 1 free COM (Serial) port, CD drive Version Required (Minimum): 6.0.0.5 Cable Type/Length: 9 pin male D-shell to male 2.5mm sterio plug, 6 feet long Computer Interface: RS-232 COM (Serial) port Note: A015 must accompany the initial purchase of the TX120 in order to operate SP100 - Temperature Data Logger with 5 Year Battery - $99  Features The Dickson Pro Series Data Loggers take data acquisition to the next level with 5-year battery life, data storage capacity of 32,512 samples and our best accuracy specifications. The SP100 monitors and records ambient temperatures making it perfect for HACCP, regulatory requirements, quality control, and SPC to name just a few. Its low price makes it perfect for building monitoring. By placing a few in critical areas and leaving them to log you will have the data when an issue does arise. It may be months before you have an issue to investigate but the data will already be there for you. User friendly DicksonWare software creates a graph of your data in seconds. DicksonWare features include complete customization of your graph, zooming, and viewing your data in tabular format. You can also view data from several loggers on a single graph enabling easy comparison of multiple sets of data. Transferring the data into documents or spreadsheets is a snap! Battery Operation - 5 Year battery life Stores 32,512 Sample Points Temperature Range -40 to +176°F (-40 to 80°C) Delayed Start Capability Faster Downloading Detailed Specifications Temperature Range: -40 to +176°F (-40 to +80°C) (non-condensing) Accuracy: ±1.8°F(±1°C) over range +14 to +176°F (-10 to +80°C); ±3.6°F(±2°C) over range +14 to -40°F (-10 to -40°C) Ambient Operating Conditions: -40 to +176°F (-40 to +80°C); 0-95% RH (non-condensing) Resolution: 0.1°F (0.1°C) Power Source: Lithium CR-2477 3V (5 years typical at 1 minute sample intervals) Data Capacity: 32,512 Sample Points Sample Interval: Variable from 10 seconds to 24 hours in 10 sec increments Indicators: LED flashes when sampling Calibration: User: Zero Pt. w/SW400 Software; Factory: Zero Pt. and Span Approvals: CE Dimensions: 3.1" x 2.1" x 0.9" (79mm x 54mm x 22mm) Weight: 1.8 oz (49g) Enclosure: Polycarbonate Resolution: 0.1°F (0.1°C) A015 - DicksonWare & Download Cable Specifications PC Software Features: Windows™ based, variable sample interval, data wrap-around, viewing data, graphing and zooming Software: Microsoft 95, 98, 2000 and NT compatible PC Requirements: PC w/386 or better micro processor, 4M RAM, 1 free COM (Serial) port, CD drive Version Required (Minimum): 5.0.1.4 Cable Type/Length: 9 pin male D-shell to male 2.5mm sterio plug, 6 feet long Computer Interface: RS-232 COM (Serial) port Note: A015 must accompany the initial purchase of the SP100 in order to operate SX120 - Dual-Channel Temperature Data Logger - $99  Features : The Dickson SX120 sets a new standard in affordable, accurate, and easy-to-use PC based temperature recording. The SX120 is a two-channel, low cost temperature Data Logger equipped with an internal sensor for monitoring ambient temperatures and an optional remote probe for monitoring liquids, semi-solids and hard to reach areas. User friendly DicksonWare software creates a graph of your data in seconds. DicksonWare features include complete customization of your graph, zooming, and viewing your data in tabular format. You can also view data from several loggers on a single graph enabling easy comparison of multiple sets of data. Transferring the data into documents or spreadsheets is a snap! Ideal for accurate recording of temperature for quality control in hard to reach places. Recorded temperature data is easly downloaded and intigrated into spreadsheets and documents Battery Operation - 1 Year battery life Stores 7,680 Sample Points Internal Temperature Range -40 to +176°F (-40 to 80°C) External Temperature Range -40 to +248°F (-40 to 120°C) Delayed Start Capability Faster Downloading Detailed Specifications Internal Temperature Range: -40 to +176°F (-40 to +80°C)(non-condensing) Internal Accuracy: ±1.8°F(±1°C) over range +14 to +176°F (-10 to +80°C); ±3.6°F(±2°C) over range +14 to -40°F (-10 to -40°C) Internal Temperature Sensor: Digital temperaure sensor External Temperature Range: -40 to +248°F (-40 to 120°C) (non-condensing) External Temperature Accuracy: ±1.8°F(±1°C) over range +32 to +158°F (-10 to +80°C); ±5.4°F(±3°C) over range -40 to +248°F (-40 to +120°C) External Temperature Sensor: Precision thermistor Remote Probe Dimensions: 6" x .225" dia (183cm x .57cm dia) Ambient Operating Conditions: -40 to +176°F (-40 to +80°C); 0-95% RH non-condensing Power Source: 3V Lithium coin cell battery, approximately 1 year at 1 minute sampling (user replaceable) Power Status Indicator: LED - Flashes when logging Data Capacity: Single channel operation: 7,680 sample points; Dual channel operation: 3,840 sample points (each channel) Sample Interval: Variable from 10 seconds to 24 hours in 10 sec increments Resolution: Internal Sensor: 0.9°F (0.5°C); External Sensor: 1.8°F (1°C) over range +32 to +158°F (0 to +70°C) Memory: Non-volatile (retains data even when battery is removed) Calibration: User: None; Factory: Zero Pt. Approvals: CE Enclosure: Polycarbonate Dimensions: 3.1" x 2.1" x 0.9" (79mm x 53mm x 32mm) Weight: 1.8 oz (49g) Response Time: 10 minutes to move 63% of full scale; 1 minute to move 63% of full scale (external) Note: A015 must accompany the initial purchase of the SX120 in order to operate A015 - DicksonWare & Download Cable Specifications PC Software Features: Windows™ based, variable sample interval, data wrap-around, viewing data, graphing and zooming Software: Microsoft 95, 98, 2000 and NT compatible PC Requirements: PC w/386 or better micro processor, 4M RAM, 1 free COM (Serial) port, CD drive Version Required (Minimum): 6.0.0.5 Cable Type/Length: 9 pin male D-shell to male 2.5mm sterio plug, 6 feet long Computer Interface: RS-232 COM (Serial) port Accessories A015 Data Logger Software and Interface Cable $59 A713 Water Resistant Pouch $25 A715 Locking Wall Mount Case $40 E100 One Year Extended Warranty $59 N100 1 Point NIST Traceable Certificate of Calibration $99 N300 3 Point NIST Traceable Certificate of Calibration $149 N400 A2LA Accredited Calibration 3-pt. $259 N520 Software Certificate of Validation $29 SW400 Calibration Software $149 Models SP100 Temperature Data Logger with 5 Year Battery $99 Notes: A015 must accompany the initial purchase of data logger in order to operate SP120 Dual-Channel Temperature Data Logger with 5 Year Battery $119 Notes: A015 must accompany the initial purchase of data logger in order to operate & A150 required to operate second channel TP120 Temperature & Humidity Data Logger with 5 Year Battery $159 Notes: A015 must accompany the initial purchase of data logger in order to operate TX120 Temperature & Humidity Data Logger $139 Notes: A015 must accompany the initial purchase of data logger in order to operate A015 DicksonWare Software and Download Cable $59 Please select Model and additional accessories from the menu's below
|
|
© 2000 Omni Controls, Inc.. All Rights Reserved. |
