|
Item category 500/1000V Handheld Megohmmeters
|
 Description Click here to view full-pdf specification sheets Suitable for testing to the IEE Wiring Regulations Complies with the requirements of BS 7671, HD 384 and IEC 364 Combined insulation and continuity testing Insulation testing at 500 V d.c. to the VDE 0413 Part 1 The MEGGER BM100/4 and BM101/4 Insulation and Continuity Testers provide an insulation test voltage of 500 V d.c. The instruments have two continuity measuring ranges: 0 to 2 W and 0 to 200 W . The BM100/4 has an automatic voltage indicating facility that warns, before a test is executed, if the instrument has been inadvertently connected to an energised supply. This warning is given by a reading on a 0 to 600 V a.c. scale on the meter; this scale also monitors the discharging voltage following tests on a capacitive circuit. The BM101/4 does not have the voltage indicating facility, but instead has an additional resistance range of 0 to 1 MW. Applications The BM100/4 and BM101/4 are intended for insulation and continuity testing during installation, servicing or maintenance work. In particular, they are suited to domestic and industrial wiring systems being tested to the IEE wiring regulations. They may be used for testing other items of electrical equipment (e.g., transformers, motors, generators, etc.). The instruments have been designed to conform to the IEC 1010-1 safety specification, and to performance standard VDE 0413 Part 1. Features • Suitable for testing to the IEE wiring regulations • Complies with BS 7671, HD 384 and IEC 364 • Combined insulation and continuity testing • Insulation testing at 500 V d.c. to the VDE 0413 Part 1 specification • Designed under the IEC 1010-1 safety specification • Shrouded safety terminals with right-angled test lead connectors • Automatic discharge of capacitive circuits after test • Lightweight, tough and robust Specifications  Ordering Details Insulation and Continuity Tester . . . . . . . . . BM100/4 Insulation and Continuity Tester . . . . . . . . . BM101/4 Included Accessories Zip-up carry case. . . . . . . . . . . . . . . . . . . . . . . 6420-075 Test leads including prods and clips (1 set)..... 6220-434 Operating instruction book . . . . . . . . . . . . ... . 6171-549 Note: When measuring or detecting voltage, the advice given in Health and Safety Executive Guidance Note GS 38 must be followed, particularly in regard to the use of test leads with fused prods. Optional Accessories Synthetic test and carry case . . . . . . . ...... . . . 6420-030 Right-angled adaptors, enabling use of leads with straight connectors, 4 mm Black . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6320-176 Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6320-177 Test leads with fused prods, FPK4 — unsuitable for continuity measurements: comply with Health and Safety Executive Guidance Note GS 38 (1 set) . . . . . . . . . ... . . 6110-920 Please call 1800 783 6664 for any items not listed Model BM100/4 Resistance range 0 - 200 Ohm BM101/4 Resistance range 0 - 1 M Ohm Please order from the menu below © 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |