|
Item category Electrical Test Equipment
|
 Fluke T2 Voltage and Continuity Tester --------------------------------------------------------------- Now You Can Get More From a Tester The Fluke T2 is a voltage and continuity tester that's designed to work long and hard. There are no settings_just probe the circuit and the T2 will show you whether you're looking at ac volts, dc volts, or an open circuit. You don't even have to turn it on or off! With seven different voltage indicators, it can clearly differentiate between key voltage levels. Features LEDs clearly indicate seven ac and seven dc nominal voltage levels Indicates dc voltages as low as 6V DC polarity indicator Compact and rugged_fits in a tool pouch or overall pocket Automatically selects continuity beeper or voltage measurement Can stay connected much longer than solenoid type testers Rugged enough to withstand a 10-foot (3m) drop Protected to 1000V input, for use in CAT III environments Automatically activates and shuts down to conserve battery power Heavy-duty test leads for long life ----------------------------------------------------------------- Fluke T2 Voltage and Continuity Tester Specifications General Specifications Electrical Continuity threshold: Beeper on at <150,000W, Beeper off at >300,000W Input impedance: Approximately 1 MW AC frequency response: 45 Hz to 66 Hz Voltage levels: ---------- SEE ABOVE Battery Type: (2) AA Carbon Zinc Life: 250 hours Test leads Type: Fixed. Replaceable by service technician or service center Wire: Heavy duty, extra flexible with black insulation rated for a breakdown of 1000V Probes: Shipped with one of two nonremovable tip styles, U.S. (flat blade) or European (4mm); one red, one black Environmental requirements Operating temperature: -10°C to +50°C Storage temperature: -30°C to +60°C indefinite Humidity 0% to 95% (0°C to 30°C) 0% to 75% (30°C to 40°C) 0% to 45% (40°C to 50°C) Dust/water resistant Operating altitude: 3000m minimum Mechanical Size: 1.3" H X 1.8" W X 6.3"L (33 mm x 46 mm x 16 mm) Weight: 7 oz (approximate) Safety Maximum operating voltage: 1000V ac/dc between any terminal and earth ground (protection only) Protection classes: Pollution Degree II, Overvoltage Category III per IEC 61010-1 Agency approvals: UL, CSA, and VDE Manufacturer's certification: CE Warranty 1 year Calibration No calibration ------------------------------------------------------------------ © 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |