|
Item category Digital / Analog Multimeters
|
 Fluke 16 Multimeter with Thermometer -------------------------------------------------------------- Features at a Glance: It's a thermometer The Fluke 16 measures temperature quickly and accurately. Standard equipment includes an 80BK integrated DMM temperature probe. It's a flame rod circuit tester A microamp function is included for flame sensor measurements down to 0.1 microamps. It's a multimeter with capacitance Use the Fluke to test motor start and run capacitors up to 10,000 microfarads. Rely on the Fluke 16 to make your everyday measurements - up to 600 volts ac or dc, 40 megohms, diode test and exceptionally fast continuity. ------------------------------------------------------------------- Accurate temperature measurement from -40 to 750°F (-40 to 400°C) (500°F with supplied probe) Confidently test flame sensor circuits with microamp measurement down to 0.1 microamps Capacitance up to 10,000 microfarads Min/Max recording with relative time stamp records the highest and lowest voltage readings during a 100-hour period Auto-ranging High resistance ranges to 40 megohms Millivolt range for compatibility with other accessories V-Check™ mode is designed for safety. When measuring ohms, continuity, or diode test modes, the meter automatically switches to measuring ac or dc volts if more than 4.5V is present Continuity Capture™ locates intermittent opens as brief as 250 microseconds and identifies them in a symbolic display as short-to-open or open-to-short Sleep mode preserves battery life 4000 count digital display Meter includes 80BK integrated DMM temperature probe, TL75 Test Leads, and C10 Holster ----------------------------------------------------------------- Specifications Range 4000 mV * Resolution: 1 mV Accuracy: 0.9% + 2 Range 4.000 V Resolution: 0.001 V Accuracy: 0.9% + 2 Range 40.00 V Resolution: 0.01 V Accuracy: 0.9% + 1 Range 400.0 V Resolution: 0.1 V Accuracy: 0.9% + 1 Range 600 V Resolution: 1 V Accuracy: 0.9% + 1 *The 4000 mV range can only be entered in manual range mode. Use the 4000 mV range with accessories. AC Volts Specifications Range 4000 mV * Resolution: 1 mV Accuracy: 1.9% + 3 Range 4.000 V Resolution: 0.001 V Accuracy: 1.9% + 3 Range 40.00 V Resolution: 0.01 V Accuracy: 1.9% + 3 Range 400.0 V Resolution: 0.1 V Accuracy: 1.9% + 3 Range 600 V Resolution: 1 V Accuracy: 1.9% + 3 *The 4000 mV range can only be entered in manual range mode. Use the 4000 mV range with accessories. Current (AC/DC) Specifications Range 200 µA Resolution: 0.1 µA Accuracy: 0.5% + 2 Ohms Specifications Range 400.0 W Resolution: 0.1 W Accuracy: 0.9% + 2 Range 4.000 KW Resolution: 0.001 KW Accuracy: 0.9 % + 1 Range 40.00 KW Resolution: 0.01 KW Accuracy: 0.9% + 1 Range 400.0 KW Resolution: 0.1 KW Accuracy: 0.9% +1 Range 4.000 MW Resolution: 0.001 MW Accuracy: 0.9% +1 Range 40.00 MW Resolution: 0.01 MW Accuracy: 1.5% +3 Capacitance Specifications * Range 1.000 µF Resolution: 0.001 µF Accuracy: 1.9% + 2 Range 10.00 µF Resolution: 0.01 µF Accuracy: 1.9% + 2 Range 100.0 µF Resolution: 0.1 µF Accuracy: 1.9% + 2 Range 1000 µF Resolution: 1.0 µF Accuracy: 1.9% + 2 Range 10,000 µF Resolution: 10.0 µF Accuracy: 10% + 90 typical *The accuracy specification is for capacitors that have negligible dielectric absorption. Capacitance measured with rc charge technique that evaluates C = Q/V. Capacitors with non-negligible dielectric absorption can be measured but measurement values may be in error. Temperature Specifications * Range 15 to 750 °F Resolution: 0.1 °F Accuracy: 1% + 1.5 °F typical Range -40 to 15 °F Resolution: 0.1 °F Accuracy: 5% + 2.7 °F Range -10 to 400 °C Resolution: 0.1 °C Accuracy: 1% + 0.8 °C typical Range -40 to 10 °C Resolution: 0.1 °C Accuracy: 5% + 1.5 °C *Temperature accuracy specifications do not include the error of the thermocouple. Safety 600V ac/dc Maximum voltage between any terminal and earth ground. Conforms to the requirements of IEC-1010-1, 1990-09 and ANSI/ISA-S82.01-94 for use in Overvoltage Category III locations. Make ac or dc voltage measurements on electrical distribution systems to 600V where transients do not exceed 6 kV and only on circuits limited to 14 kVA if the circuit voltage rating is above 250V. Certification agencies (approvals/listings pending) UL Per standard UL 3111 CSA Per standard CSA/CAN C22.2 No.1010.1-92 TsV Per standard EN61010 Part 1-1993 Drop test ANSI/ISA-S82.01-94 and EN61010 Part1-1993. 10 ft. drop to hardwood on concrete General Specifications Size (HxWxL) 1.12" x 2.95" x 6.55", (2.8 cm x 7.5 cm x 16.6 cm) Battery life 650 hours with Alkaline Weight 12 oz (340g) Warranty Three years ------------------------------------------------------------- Accessories available for these Models Model Accessory or Option Description 80AK Thermocouple Adapter 80K-40 High Voltage Probe (DC only) 80K-6 High Voltage Probe (DC only) 80PK-2A K-Type Immersion Probe (Requires 80TK Thermocouple Module) 80PK-3A K-Type Flat Surface Probe (Requires 80TK Thermocouple Module) 80PK-4A K-Type Air Probe (Requires 80TK Thermocouple Module) 80PK-5A Piercing Probe (Requires 80TK Thermocouple Module) 80PK-6A K-type Exposed Junction Probe (Requires 80TK Thermocouple Module) 80PK-7 K-Type Industrial / Heavy Duty Surface Probe (Requires 80TK Thermocouple Module) 80PK-8 K-Type Probe Pipe Clamp Temperature Probe 80PK-8 (Requires 80TK Thermocouple Module) 80PK-IR Infrared Temperature Probe 80T-IR Non-Contact Infrared Temperature Probe 85RF High Frequency Probe, 500 MHz C100 Universal Carrying Case C12A Soft Case for 10 Series C530 Leather Accessory Case C550 Tool bag C789 Toolcase i-1010 Clamp-on AC/DC Current Probe i-410 Clamp-on AC/DC Current Probe PV350 Pressure/Vacuum Module (0 to 350 PSI) TL20 63" Test Lead Set TL22 63" Right Angle Silicone Test Lead Set TL23F Electrical Test Lead Set TL23R Electrical Test Lead Set TL24 63" Right Angle/Straight Silicone Test Leads TL26A 60" 5-Way Test Lead Set TL28A 63" Alligator Clip Test Lead Set TL71 Premium DMM Test Lead Assembly TL74 4 mm Diameter Test Leads Y8140A 48" Slim Flex Test Lead Set CLICK HERE TO PURCHASE ACCESSORIES
© 2006 Omni Controls, Inc.. All Rights Reserved. Email: Sales@Omnicontrols.com We guarantee a 24 hour response on all inquiries made via email. For quicker response please call Omni Controls at any of the above numbers |