CATEGORY MAIN MENU ....................................... |
...... |
Catalog:Water Level Monitoring 
Ametek Model 550 Submersible Level Transmitter Ametek Model 550 Submersible Level Transmitter/Model 575 (with CSA approval) Model 550 Low Cost Submersible Level Transmitter General The Model 550 Submersible Level Transmitter is specially designed to provide the convenience of direct submergence in many types of liquid for quick, accurate and reliable level measurement. The simple design and rugged construction of this solid state instrument provide long lasting service with virtually no maintenance. The transmitter comes with the cable pre-wired from the factory. Ranges: Feet of Water: 0 to 14, 0 to 35, 0 to 69, 0 to 138, 0 to 230, 0 to 345, 0 to 460, 0 to 690 Meters of Water: 0 to 4, 0 to 10, 0 to 21, 0 to 42, 0 to 70, 0 to 105, 0 to 140, 0 to 210 BAR: 0 to 0.4, 0 to 1, 0 to 2, 0 to 4, 0 to 7, 0 to 10, 0 to 14, 0 to 20 PSI: 0 to 6, 0 to 15, 0 to 30, 0 to 60, 0 to 100, 0 to 200, 0 to 300 Output: 4 to 20 mA DC limited to 30 mA DC Power Supply: 12 to 28 VDC with reverse polarity surge protection Overrange Effect: ±0.15% FS at 300% of maximum range Accuracy: ±0.25% FS, BFSL (including linearity, hysteresis and repeatability); ±0.50% FS (6 psi range only) Construction: 
Diaphragm: Type 316L Stainless Steel
Housing Type: 316 Stainless Steel
Nut/Washer Type: 316 Stainless Steel
Cable Grommet: Viton
Housing O-Ring: Viton
Cable Jacket: Polyurethane
Electrical Connection: Attached 4-wire, 20 gauge polyurethane shielded cable. Unspliced lengths available up to 5000 ft. (1662 m). Assembled at factory.
Model 575 is basically the same as the 550 but includes CSA approval (explosion proof casing)
SPECIFY MODEL NUMBER AND CORRESPONDING OPTION CODES.
FOR EXAMPLE
A MODEL 550 SNUBNOSE TRANSMITTER
WITH 12-40 VDC AND 4-20 mA OUTPUT
0-15 PSI,
CABLE SUPPORT,
316 STAINLESS STEEL DIAPHRAGM,
SILICONE OIL FILL
AND 100 FT OF CABLE
550-S-B-0015-R-L-S100
|
|
© 2000 Omni Controls, Inc.. All Rights Reserved. |
