Item category
Storm and Waste Water Samplers
|
|
Sludge Judge II
|
|
|
 |
- This
sampling device enables you to take accurate readings on
settled solids in a variety of liquids, to any depth.
- Ideal for
sewage treatment plants, chemical plants, food processing
facilities... anywhere that accurate samples of solids in
non-caustic materials are needed.
- Comes in
five-foot sections of 1.25" OD plastic pipe with screw
type fittings. The top section includes a nylon line for
raising the sampler.
- When
assembled it holds 6oz. per foot. That is double the capacity
of the original Sludge Judge.
|
|
|
Lower the
Sludge Judge II to the bottom of the tank. A float valve opens,
allowing materials to flow in. When the bottom has been
reached and the pipe has filled to the surface level, tug slightly on the
rope as the unit is raised. This sets the check valve, trapping the column
of solids and liquid in the Sludge Judge II.
When the unit has been raised clear of the liquid, the amount of solids in
the sample can be read using the one foot increments marked on the pipe
sections. To release the material in the unit, touch the pin extending
from the bottom section against a hard surface. This opens the check valve
to drain the sample.
|
|
|
|
|
Float valve is open
|
Check
valve is set |
| Sludge
Judge II parts and accessories : |
 |
(Top) |
| (Middle) |
| (Bottom) |
 |
Convenient
carrying case is available. |
 |
For easy
cleaning of the Sludge Judge, this 6 foot spiral brush is designed for a
snug fit. Simply slide the brush in and out using a mild detergent and
water. |
| ORDER
NO. |
DESCRIPTION |
PRICE |
|
|
15' Sludge
Judge II |
95.95 |
|
|
Optional Case |
23.50 |
|
|
Optional 6 ft
Cleaning Brush |
11.30 |
|
|
Extra Top
Section with Rope |
25.65 |
|
|
Extra
Extension Section |
35.45 |
|
|
Extra Bottom
Section with Valve |
39.65 |
|
|
© 2000 Omni Controls, Inc.. All Rights Reserved.
|