Item category
Conductivity TDS Testers Monitor Controller\Transmitter
|
|
CON 1000 and RES 1000 Controllers
CON 1000 and RES 1000 Controllers
|
Fast on/off control with high ±0.5% accuracy- a performance
breakthrough!
|
Large dual LCD shows measurement plus temperature simultaneously
Two set point, two SPDT
relay operation... choose from lo/lo, lo/hi,or hi/hi control
Separate alarm relay
View control set points
and other set up information with a button press
Adjustable temperature
coefficient from 0.00 to 10.00% per °C
Choice of 0.01, 0.1, 1.0
or 10.0 cell constants
Push button one-point
calibration
Two level password
protection prevents tampering with settings
LED indicators signal
control activities to monitor controller status
Built-in memory backup
maintains set up if power fails
Our flexible OAKTON 1000 series 1/4 DIN conductivity and resistivity
controllers have an advanced set-up mode to easily customize features.
Their 0 to 2000 second selectable time delay and adjustable set point
hysteresis bands mean you can tailor control relay action to meet your
needs.
Each unit is selectable for isolated 0-20 or 4-20 mA
transmitter/recorder output; 110 or 220 VAC; normally open or closed
relays; and manual or automatic temperature compensation. The compact
1/4 DIN size fits into standard panel cutouts. The IP54 rated front
panel keypad is weather resistant. Includes mounting hardware.
Click below to download Acrobat (.pdf)
file of:
CON
1000 and RES 1000 controllers product bulletin
CON
1000 and RES 1000 controllers manual
| Measures |
Conductivity, resistivity, °C |
| ConductivityRange |
0.000 to 1.999 µS, 0.00 to 19.99 µS, 0.0 to
199.9 µS, 0 to 1999 µS, 0 to 5000 µS, 0.00 to 19.99 mS, 0.0
to 199.9 mS |
| ConductivityResolution |
0.001 µS to 0.1 mS |
| ConductivityCell constant |
selectable from 0.1, 1.0, or 10.0 |
| ResistivityRange |
0.000 to 2.000 M
, 0.00 to 20.00 M
|
| ResistivityResolution |
0.001 M
or 0.01 M
|
| ResistivityCell constant |
selectable from 0.01 or 0.1 |
| Calibration |
one point |
| Control accuracy |
±0.5% full scale |
| TemperatureRange |
0 to 100°C |
| TemperatureResolution |
0.1°C |
| TemperatureAccuracy |
±0.5°C |
| TemperatureCalibration |
offset up to ±5°C |
| Control type |
on/off |
| Number of inputs |
one |
| Number of set points |
two (high and low) |
| Separate alarm relay |
yes |
| OutputControl |
2 SPDT relays, 6 A at 110 VAC, 250 VAC maximum |
| OutputAlarm |
1 SPDT relay, 6 A at 110 VAC, 250 VAC maximum |
| OutputCurrent |
isolated 0-20.4-20 mA, with 20% to 100%
full-scale scalable boundaries, 600
maximum load |
| Hysteresis |
0 to 10% of range |
| Relay delay |
selectable, 0 to 2000 seconds |
| Input impedance |
10^12 M
|
| Electrical isolation |
yes, galvanically |
| Temperature Sensor |
100
or 1000
Pt RTD |
| Temperature Compensation |
Automatic or manual from -9.9 to 125°C |
| Password protection |
two level password |
| Display |
dual line LCD, 4-digit upper and 3 1/2 digit
lower |
| Operating Temperature |
-10 to 60°C |
| Housing |
1/4 DIN panel cutout |
| Dimensions |
3.8" x 3.8" x 6.9" (9.6 x 9.6 x
17.5 cm) |
| Shipping weight |
2.5 lbs (1.2 kg) |
| |
© 2000 Omni Controls, Inc.. All Rights Reserved.
|