Switch from conductivity (or TDS) to °C readings with the touch of a
button
Waterproof, dustproof
housing that floats is certifiable to IP67 standards
Replaceable sensor lets
you reuse same meter body, saving you money
Automatic Temperature
Compensation
Push-button calibration,
Hold function, Auto-Off
These testers let you take readings two ways: simply immerse tester
tip into sample, or pour a small amount of your sample directly into the
sensor cup. Tester displays conductivity or TDS reading; switch to °C
readings with the press of a button.
Valox® housing and stainless steel electrodes offer good
chemical compatibility. Replaceable sensors let you reuse meter body
without losing waterproof protection. Choose from six models in high
range, low range or pure range. The "pure+" models have an
extremely low range for pure water applications.
Click below to download Acrobat (.pdf)
file of:
Waterproof
TDSTestrs+ and ECTestrs+ product bulletin
Waterproof
TDSTestrs+ manual
Waterproof
ECTestrs+ manual
Tech tip:
TDSTestr Comparison Chart
| Range |
TDSTestr+ Pure: 0 to 199.9 ppm
TDSTestr+ Low: 0 to 1999 ppm
TDSTestr+ High: 0 to 10.00 ppt
ECTestr+ Pure: 0 to 199.9 µS
ECTestr+ Low:0 to 1999µS
ECTestr+ High: 0 to 19.99 mS |
| Resolution |
TDSTestr+ Pure: 0.1 ppm
TDSTestr+ Low: 1 ppm
TDSTestr+ High:0.01 ppt
ECTestr+ Pure: 0.1 µS
ECTestr+ Low:1 µS
ECTestr+ High: 0.01 mS |
| Accuracy |
±1% full-scale |
| Calibration |
One point push button |
| Temperature |
Features °C readout |
| Waterproof/Dustproof (IP67) |
Yes |
| ATC |
Yes |
| Electrode |
Replaceable |
| Operating Temperature |
0 to 50°C (32 to 122°F) |
| Power |
Four 1.5 V batteries |
| Battery life |
140 hours continous use |
| Dimensions |
6.5" x 1.5" dia (16.5 cm x 3.8 cm dia) |
| Shipping weight |
4.5 oz (125 g) |
|