Push-button ±150 mV offset adjustment- no screwdriver necessary
Hold function; Auto-off; Error messages
Use the ORPTestr BNC with any ORP electrode with BNC connector
The microprocessor-based OAKTON ORPTestr BNC is ideal for
instant, repeatable mV ORP (Redox) checks using ORP electrodes
selected for the application needs. Push-button calibration lets
you standardize your tester in calibration solutions, or make it
agree with an established work standard.
The ORPTestr BNC features a BNC connector for repeated use with
a wide variety of ORP electrodes. This allows you to reuse the
Testr body many times over, which saves you money over time.
Click below to download Acrobat (.pdf)
file of:
ORPTestr
BNC product bulletin
ORPTestr
BNC manual
Tech Tip:
Introduction to ORP
Tech Tip:
Conditioning ORPTestr for Maximum Response
Tech Tip:
Calibrating ORP Measurement Systems
| Range |
-50 to +1050 mV |
| Resolution |
5 mV |
| Accuracy |
±5 mV |
| Calibration |
Offset up to ±150 mV |
| Electrode |
Use with any ORP electrode with BNC
connector |
| Operating Temperature |
32 to 122°F (0 to 50°C) |
| Power |
Three 1.5 V batteries |
| Battery life |
55 hours continuous use |
| Dimensions |
5.9" x 1.5" x 0.8" (15 x 4 x
2.5 cm) |
| Shipping weight |
4.5 oz (125 g) |
| 
;)