CATEGORY
Current / Voltage Loggers / Power
MAIN MENU
|
 Features The AC Exception Voltage Simple Logger Model L215 is the ideal product to capture short-term events such as sags and swells. This logger samples the input 10 times per second and only stores the data when an alarm threshold is crossed, thus maximizing its use of memory. The 65,000-point storage capacity provides enough memory to store more than 1000 events. The Model L215 is powered by the AC voltage signal it is monitoring and incorporates a backup battery to provide up to one year of additional operation and data storage protection. 0 to 250Vrms 10 samples per second Stores data when alarm level is tripped True RMS measurements 64K storage memory 10 bit resolution (250mV) Detect sags and swells Scale automatically selected by software Software programmable HI and LO alarm levels Alarm trip LED indicator Applications: Surge/sag monitoring Computer room monitoring Residential monitoring Machine monitoring Marine power monitoring Specifications Electrical Specifications Number Of Channels: 1 Measurement Range: 0 to 250Vrms Input Connections: Recessed safety banana jacks Resolution: 10 bit, 250mV max Accuracy: 1% of Reading +250mV Sample Rate: 36,000/hr (10 samples/sec) Data Storage: Approximately 65, 536 readings Data Storage Technique: Exception recording in FIFO mode; 60 samples stored when alarm is tripped. Each 60 sample recording is considered to be a packet. When memory is full, data will be overwritten one packet at a time beginning with the oldest. Power Source: AC powered with 9V Alkaline battery backup Battery Life: Up to 1 yr of recording @ 25° C Output: RS-232 via DB9 connector (@4800 baud) Indicators: Red LED double flashes in LOGGING, single flashes in STANDBY and is off in OFF mode. Amber LED flashes once every 2 seconds when alarm level has been tripped. Amber light can only be reset by stopping the recording and downloading the data. Controls: One button used to start and stop recording sessions and to turn the data logger on and off Mechanical Specifications Size: 2-7/8 x 2-5/16 x 1-5/8" (73 x 59 x 41 mm) Weight: 5 oz (140g) Mounting: Base plate mounting holes or Velcro pads supplied loose Case Material: Polystyrene UL VO Environmental Specification Operating Temperature: -4 to +158° F (-20 to +70° C) Storage Temperature: -40 to +174° F (-40 to + 80° C) Relative Humidity: 5 to 95% non-condensing Protection Index: NEMA2 Software Compatibilty: Windows 3.1, Windows 95, Windows 98 Safety / Reference Specifications Safety Rating: IEC 1010, 30V, Cat. III Accessories Please call 1800 783 6664 Model AEMC L215 AC Voltage Logger Please select from the drop down menu below © 2002 Omni Controls, Inc.. All Rights Reserved. |
