CATEGORY
MAIN MENU
|
 Features The AEMC Clamp-on Meter Model 514 is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 514 is autoranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range. The Model 514 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function. The Model 514 also uses Hall sensor technology that provides both DC and AC current measurements to 1000A. The Model 514 is sized for a comfortable, one-handed operation. This model is average sensing and designed for traditional average responding electrical systems. Standard size, full function clamp-on meter 1000AAC current measurements 600VAC/DC volt measurements TRMS measurements Resistance measurement to 4000W Continuity with beeper below 40W Frequency measurements from V and A Diode test 1ms Peak function for fast capture of signals Hold function to "freeze" readings Push-button for easy ADC zeroing Large easy-to-read 4000-count display 42-segment analog bargraph Supplied with test leads and soft carrying case Applications: Commercial, industrial, residential and HVAC troubleshooting Power panel, junction box and battery bank monitoring AC or DC motor testing Power plant troubleshooting Electrical testing and troubleshooting on non-linear loads, such as adjustable speed drives and computers Specifications Electrical Specifications AC Current Range 0.05 to 1000Arms Resolution 40A: 0.01A; 400A: 0.1A; 1000A: 1A Basic Accuracy 50 to 60Hz: ±1.9% Reading + 5cts; 60 to 500Hz: ±2.5% Reading + 5cts Frequency Range 50 to 500Hz Overload Protection 1200Arms DC Amperes Range 1A to 1000A Resolution 40A: 0.01A, 400A: 0.1A; 1000A: 1A Accuracy ±2.5% Reading + 10cts Overload Protection 1200Arms AC Volts Input Range 0.5V to 750V Range 400V / 750V Resolution 0.1V / 1V Accuracy ±1.5% Reading + 5cts Input Impedance 10MW Overload Protection 1000Vrms Frequency Input Current Input Voltage Input Range 4kHz 10kHz 4kHz 10kHz Resolution 1Hz 10Hz 1Hz 10Hz Minimum Input Signal 2Arms 5Arms 5Vrms 10Vrms Accuracy ±0.1% Reading + 1ct (20 to 10kHz) ±0.1% Reading + 1ct (10 to 10kHz) DC Volts Range 0.2 to 1000V Resolution 400V: 0.1V; 1000V: 1V Accuracy ±1% Reading + 2cts Input Impedance 10MW Overload Protection 1000Vrms Continuity Range Beeper Measurement <40W Max. Test Voltage 3VDC Overload Protection 600Vrms General Specifications Digital Display: Digital: 3¾ digits LCD display, 4000 count (max. reading 3999) Analog Display: Fast 42-segment analog bargraph display Symbol & Scale Range: Automatic according to range and input signal Polarity: Minus sign displayed when negative signal applied to input Overload: OL Displayed when input signal exceeds range Sample Rate: 2 samples/sec for the digital display; 20 samples/sec for the analog bargraph Jaw Opening Size: 1.575" (40mm) Battery: 9V, NEDA 1604 or 6F22 or 006P Low Battery Indicator: Symbol displayed when the battery is below the required voltage Auto Power Off: The meter will power itself OFF if there is no push button or rotary switch operation for 30 minutes Dimensions: 9.53 x 2.60 x 1.42" (242 x 66 x 36mm) Weight: 14.10oz (400g) with batteries Environmental Specification Operating Temperature: 32° to 104°F (0° to 40°C), <80% RH, non-condensing Storage Temperature: 14° to 140°F (-10° to 60°C), <70% RH, battery removed Operating Altitude: 2167 feet (2000 meters) Safety / Reference Specifications Protection Level: Double insulation; EN 61010, 600V, Cat. III and EN 61010, 1000V, Cat. II Agency Approvals: CE Mark Accessories Model AEMC 514 Clamp-On Meter Please select from the drop down menu below © 2000 Omni Controls, Inc.. All Rights Reserved. |
