CATEGORY
MAIN MENU
|
 Features 1, 2, and 3 output models Clean, stable output <1mVrms of ripple Adjustable 30VDC at up to 2.5A Adjustable 5VDC at 5A with 3 and 5V positions Connect the 30V outputs together to double voltage or current Master/Slave tracking with quick and easy setup Coarse and Fine voltage adjustments Current Limit adjustment with LED indication Short circuit protected at full rated current Display V and A simultaneously Front panel safety input terminals Front panel ground terminal The AX500 Series of digital DC linear power supplies are designed for use in a wide variety of applications. They are equally at home in the precise needs of an electronic design lab, as well as the continuous operation required on a production test line. The state of the art linear technology provides a highly stable, low noise output with less than 1mV of ripple on each output. Active protection circuitry provides an extra level of insurance against damage from short circuits, overloads, and over heating. Highly efficient toroidal transformers allow these supplies to operate without fans, thus eliminating noise and electromagnetic emissions. Three models are available offering single, dual and triple output capabilities. The single output, Model AX501 offers a 0 to 30VDC supply while the Models AX502 and AX503 each offer dual 30V outputs. Each provides the ability to display both voltage and current for each output. Additionally, the Model AX503 offers a 5V blind output which is adjustable from 2.7 to 5.5V. Dual 30V outputs can be connected in series to provide double the output voltage up to 60V, or they can be connected in parallel providing double the current output up to 5A. The Models AX502 and AX503 offer a unique master/slave tracking arrangement whereby the ratio between master and slave can be setup on the fly as needed during the test. Adjusting the master voltage causes the slave to track. Adjusting the slave voltage causes the ratio from master to slave to change accordingly. All three models offer both a Coarse and Fine voltage adjustment as well as current limiting adjustment. Each of these supplies are built to provide many years of reliable, precise, easy-to-use operation and will be a welcome addition to any lab, test bench or production line. Voltage levels and current limits are easily adjustable from the front panel. Applications: Engineering design labs Production testing Educational labs Quality assurance testing Approval agency testing Repair and calibration labs Specifications Electrical Specifications Voltage Output 1 0 to 30VDC Display Resolution 100mV Accuracy ±0.5% of Reading + 1ct Ripple ±1mVrms Line Regulation ±10% of Line Voltage ±0.03% Voltage Reading ±2mV Load Regulation 0 to 2.5A ±0.02% Voltage Reading ± 5mV Current Output 1 0 to 2.5A Resolution 10mA Basic Accuracy ±0.5%of Reading ±1ct Limit Indicator LED, Output 1 Short-circuit Protection Electronic current limitation with voltage shutdown Overheating Protection Thermal protection General Specifications General Power Supply 115VAC ± 10% or 230VAC ± 10% (switch selectable) Display (LED) Dual Display: VOLTAGE in Green, CURRENT in Red; 0.56" (14.2mm) digit size Operating Temperature Range 50° to 104°F (10° to 40°C) Operating Relative Humidity <80% RH up to 104°F (40°C) Storage Temperature Range -4° to 158°F (-20° to 70°C) Dimensions 10.63 x 8.86 x 4.73" (270 x 225 x 120mm) Weight 8.8 lbs (4kg) Safety / Reference Specifications Safety Output EN 61010-1, 100V, Cat. I, CE Mark Power Supply Inputs Overvoltage Cat. 300V, Cat. II Accessories Lead Set (2 color-coded leads, 1 ground lead, 2 alligator clips, 2 grip probes). Model DC Power Supply Model AX501 (Single output, 0 to 2.5A; 0 to 30VDC) . . . . . . . . . . . . . . . . . . . Please select from the drop down menu below © 2000 Omni Controls, Inc.. All Rights Reserved. |
