CATEGORY
Fibre Optic and Lan Test Equipment
MAIN MENU
|
 CLICK HERE TO VIEW MODEL DETAILS AND SPECIFICATIONS-pdf Features Feature description includes 10T1 and 20T1 for comparison, please see the pdf file for more detailed descriptions Complete in-service or out-of-service testing End-to-end T1 span testing with the most common industry standard loop codes Model 20T1 performs BERT on one of 17 standard stress patterns and two user-definable 32-bit patterns Determines T1 framing and BERT patterns Model 20T1 transmits standard, HDSL and Smart Repeater T1 loop codes Intuitive, user-friendly interface Portable for outside plant applications The Megger ฎ InterroGatr 10T1 and 20T1 are compact, feature packed T1 test sets that can be used for in-ser-viceor out-of-service testing. Com-plete end-to-end testing may be performed at any point in the span by utilizing industry standard Loop Codes. The units may be used at the DSX-1 cross connect jack panel, bridged onto the span or can be a sub-stitute for transmission equipment for real world testing. InterroGatr 20T1 In addition to its lightweight, battery-operated design, features of the InterroGatr 20T1 include: Transmits standard, HDSL and Smart Repeater T1 loop codes. Operating Modes include Originate, Fractional T1, Half duplex Drop & In-sert,Test Loopback, Local Loopback,Tone Insert, BTP (Bridge Tap Testing), MPT (Multi-pattern Testing), and LoopDelay Measurement. Performs BERT on one of 17 stan-dard stress patterns and two user de-finable 32-bit patterns. Store and recall up to four pro-grams. Measures DS1 level and frequency in volts and dB. Detects timing problems, such as clock slips. Indicates AMI or B8ZS line coding. Measures DS0 level and frequency. Displays DS0 data and signaling. Logic, BPV and Frame Single and Error Rate Inject. Detects DTMF digits. G821 performance analysis. Printer port. Feature Enhancements -- overview 4X20 LCD display with EL backlight MPT and BTP multi-pattern sequence tests Two 64-bit user programmable, non-volatile patterns 2^23, 2^20, 2^15, 1 IN 16, 63, 511, 2047, R2047 LLB Mode line loopback mode with error analysis TLB Mode test loopback mode with error analysis CSU Emulation Mode with intelligent loop code detection NIU Emulation Mode with intelligent loop code detection Store and recall of four user defined test set configurations Non-Volatile test set configuration Transmit LBO of 0dB, -7.5dB, -15dB, or -22.5dB Transmits manufacturer selectable HDSL loop codes Transmits intelligent line repeater T1 loop codes Logic error insert single and selectable rate BPV error insert single and selectable rate Frame error insert single and selectable rate Fractional (Nx56 and Nx64 kbps) BERT testing DSO insert for BERT patterns and analog tones DSO insert for live T1 circuit analog tracing tone Round trip loop delay measurement Tracks maximum positive and negative wander Flash port for field software upgrades Real time clock with day and date Timed or continuous tests Test Summary for Errored Only results G.821 performance analysis Printer / Remote port DSO DTMF Decode Circuit ID input Specifications Physical Dimensions 1.75 H x 5 W x 9 D in. (44 H x 127 W x 229 D mm) Weight 1 lb, 10 oz (46 kg) Environmental Operating Temperature -4 o to +122 o F (-20 o to +50 o C) Storage Temperature -4 o to +158 o F (-20 o to +70 o C) Humidity 95% maximum, noncondensing Power Batteries 3.6 V 4 Ah NiMH Battery Life (InterroGatr 10T1) Approximately 6 hours of continuous operation (InterroGatr 20T1) Approximately 7 hours of continu-ous operation (in monitor mode measuring clock slips, DS0 Drop on full speaker volume with a fully-charged battery) Low Battery Indicator Red LED flashes if voltage is below 3.55 V, indicating approximately 30 minutes of operation remaining Auxiliary Power 12 V dc, 1100 mA SEE PDF. FOR MORE DETAILS Accessories 620036 Bantam to Bantam Cable, Nickel Plated (5ft) $25.00 620032 RJ48 to Bantam Y Cable, (Pins 1,2 & 7,8) $65.00 620029 RJ48 to Bantam Y Cable, (Pins 1,2 & 4,5) $65.00 620030 Banam to Dual Alligator Clip Cable (5ft) $36.00 620031 Bantam to RJ48 Cable (Pins 4,5) (8ft) $35.00 620033 RJ45-F to Bantam Y Cable (Pins 1,2 & 4,5) $65.00 620035 Bantam to Mini-Grabber Cable (6ft) $65.00 620034 Bantam to DB15 Male (4ft) $65.00 561013 12VDC 1000ma Power Supply $20.00 684012 Carrying Case InterroGatr $75.00 Please call for accessories 1 800 783 6664 Model INTERROGATR-20T1 Enhanced T1/HDSL Span Verifier and Tester Please select from the drop down menu below 2695.00
Quantity: ฉ 2000 Omni Controls, Inc.. All Rights Reserved. |
