CATEGORY
Harmonic Meters, Phase Rotation, Frequency, EMF
MAIN MENU
|
 Features Please note HA 1000 replace with HA 2000 Analyzes building wiring to determine power factor and the extent of distortion generated by non-linear equipment. Helps determine the source of nagging power quality problems. Record ‘Volt/Amp signatures’ of equipment such as motors to aid in preventative maintenance. Displays: •Individual harmonics to the 31st w/THD (HA 2000-computer download) •Two cycles of the waveform •All power data (watts, vars, PF, etc.) (HA-2000 only) Stores 21 waveforms in memory Downloads all data to your PC (software included) (HA-2000 only) Specifications RANGES: Voltage 1-600 Vrms AC/DC 1000 Volts peak Current 1-1000 Amps rms AC Power 0-600 Kilowatts (HA-2000 only) Frequency Readout 40-65 Hz HARMONICS: HA-1000 First 19 odd harmonics plus THD HA-2000 First 19 odd harmonics plus THD displayed on unit; first 31 harmonics plus THD when down loaded to your PC using the Harmona-Link™ software ACCURACIES: True RMS Voltage ±2% of reading Current ±2% of reading (without current transducer) Harmonics % Voltage ±2% +6 LSD * Current ±2% +6 LSD * THD (>1%) ±1% of reading +3 LSD * *when fundamental (f) is 60Hz ±0.1 Hz Power Watts, VA, VARs, ±2% of reading PF, dPF ±0.01 Frequency ±0.1 Hz MEMORY: 21 non-volatile, user-addressable, protected locations. Powered by non-user serviceable lithium cell with an expected life of eleven years. DOWNLOAD: EIA-232-E (RS-232) Interface via RJ-11 (HA-2000 only) telephone jack. Optically isolated, 9.6K baud rate Harmona-Link™ II software: 3 1/2" floppy disk, MS-DOS® 3.3 or greater, and Windows 3.1/95; 1.4M required. Provides full harmonic analysis (to 31st) along with crest factor, form factor, K factor and power data. Note: HA-1000/HA-2000 are designed to measure harmonic distortion on 60Hz & 50Hz Electrical Systems. Fundamental frequence is user selectable. Display Super twisted liquid crystal with adjustable contrast. Backlight (HA-2000 only) General Auto-Off, Auto Ranging Unit size: 8.62" x 3.50" x 1.76" (219x89x50mm) Unit weight: 1.22 lbs (0.55 kg) Case size: 11" x 15 1/2" x 4" (394 x 279 x 102mm) Weight: (HA-2000 kit) 4.56 lbs (2.069 kg) Operating Conditions: 32° to 122° F (0° to 50° C) RH <85% Storage Conditions: -4° to 140° F (-2° to 60° C) RH < 90% Battery: Six alkaline 'AA' cells, ANSI/NEDA 15A, IEC-LR6 Life: 24 hrs continuous with backlight off 8 hrs continuous with backlight on. Instrument case material: Flame retardant ABS911 Current Transducer: #HACT-1 or HACT-2 supplied* Range: 1-1000A Frequency: 20-2000Hz (HACT-2), 40-400 HZ (HACT-1) Output: 1mV AC per 1 Amp AC Accuracy: ±1% of reading Case breakdown voltage: 3000V Jaw capacity: 2 " dia. or 2000 MCM Output leads: 3.5 mm phono jacks Voltage Leads: 1000V rms maximum * Other Transducers available. Accessories Catalog # HA-1000 includes: HA-1000 Harmonalyzer™, MTL-15 voltage leads, HACT-1 Current transducer, HA3R Memory pad & pencil and HACC carrying case. Catalog # HA-2000 includes: HA-2000 Harmonalyzer™ , HAVL-2 voltage leads, HACT-2 Current transducer, HADAPT Data cord, Harmona-Link™ II software (HADISC) HA3R Memory pad & pencil and HACC carrying case. Intruction Book P/N 79-0010-00 Please Call Model HA-2000 Please select from the menu below © 2000 Omni Controls, Inc.. All Rights Reserved. |
