|
|
Dissolved Oxygen Meter Controller Monitor Transmitter
 | Our OAKTON 1000 series 1/4 DIN dissolved oxygen controller features independent 100% and zero adjustment calibrations and offset adjustment capabilities to ensure high accuracy for your exact conditions. Its 0 to 2000 second selectable time delay and adjustable set point hysteresis bands means you can tailor control relay action to your specifications.
|
 | The nylon brush sweeps off built-up material on sensor membrane and also creates a small temporary flow past the membrane, so that the internal electrolytes are not depleted by oxygen consumption at the membrane.
|
 | Two-wire design with input-to-output isolation ensures clean signal transmission even in noisy locations
|
 | The OAKTON DO 100 meter ensures high accuracy with independent 100% and zero adjustment calibrations, and offset adjustment capabilities. It stores and recalls 16 dissolved oxygen readings with corresponding temperature- great for field readings. This meter even displays electrode diagnostics to help determine when you need to service or replace the probe. The front keypad is water resistant. Includes a dissolved oxygen/ temperature probe, electrolyte solution, and batteries.
|
 | Perfect for conditions that ruin ordinary dissolved oxygen meters! The completely waterproof OAKTON DO 300 meter reads dissolved oxygen in mg/L, ppm or % saturation. Its waterproof construction lets you thoroughly wash the meter to maintain working condition.
|
 | Perfect for conditions that ruin ordinary meters—the DO 310 meter is completely waterproof. It features an adjustable backlit display for easy viewing in dim areas. Independent 100% and zero adjustment calibrations and offset adjustment capabilities ensure high accuracy. This meter even displays electrode diagnostics to help determine when probe needs replacing. Other features include Hold function; Auto-Off; and Ready indicator.
|
 | The microprocessor-based OAKTON waterproof pH/DO 300 meter meets IP67 ratings for dustproof and waterproof ingress protection. Advanced setup mode lets you customize meter parameters and view calibration values and electrode slope for both pH and Dissolved Oxygen for diagnostic purposes. All functions are accessible from the waterproof keypad.
|
© 2000 Omni Controls, Inc.. All Rights Reserved. |
;)