ScopeMeter^® 190 Series
Features

All Of This Power In The Palm Of Your Hand

ScopeMeter 190 Series has specifications you'll typically find on high-end bench oscilloscopes. They offer 200 MHz, 2.5 GS/s real-time sampling and advanced memory and triggering functions. They're rugged, compact and battery powered.

• A choice of bandwidth
  
• Fast sampling to see what's really happening
  
• Connect-and-View™ Automatic triggering for an instant, stable display
  
• Automatic capture and replay of 100 screens
  
• Deep memory for high-resolution ScopeRecord™
  
• Advanced trigger modes
  
• Analysis Power
  
• Use TrendPlot™ to help find intermittents, fast
  
• Measure from mV to kV
  
• A versatile test-tool

• Specifications
  
• Available Accessories and Options
  

A choice of bandwidth

The ScopeMeter 190 Series offers up to 200 MHz bandwidth for capturing high frequency signals found in today's state-of-the-art electronics. For less demanding applications, there's also a 100 MHz and a 60 MHz model. You still get the same advanced functionality without paying for the bandwidth you don't need.

Fast sampling to see what's really happening

With a maximum real-time sampling rate of 2.5 GS/s per input, you can see what really happens with 400 p resolution. Both inputs have their own digitizer, so you can simultaneously acquire two waveforms and analyze them with the highest resolution and detail. If an anomaly flashes by on the screen, just press the Replay button to see it again.

Connect-and-View™ Automatic triggering for an instant, stable display

Scope users know how difficult triggering can be. Wrong settings show unstable and sometimes wrong results. Fluke's unique Connect-and-View™ recognizes signal patterns, and automatically sets up correct triggering. It provides a stable, reliable and repeatable display of virtually any signal, including motor drive and control signals, without touching a button. Signal changes are instantly recognized and settings adjusted for, once again, a stable display. Benefit from the speed and convenience when measuring a number of test points in quick secession, unlike ordinary AutoSet/AutoRanging scopes.

Automatic capture and replay of 100 screens

Scope users know how frustrating it is to see a one-time anomaly flash by never to be seen again. Not with the ScopeMeter 190 Series! Now you can look back in time with a touch of the replay button. In normal use, the instrument continuously memorizes the last 100 screens. Each time a new screen is acquired, the oldest is discarded. At any moment you can "freeze" the last 100 screens and scroll through picture-by-picture or replay as a "live" animation. Cursors can be used for further analysis. You can even use the advanced trigger capabilities to capture up to 100 specific events. Two sets of 100 captured screens with individual time stamps can be stored for later recall or download to a PC.

Deep memory for high-resolution ScopeRecord™

The memory stores 27,500 points per input for high resolution recording of events up to 30 hours, and still captures fast intermittents and glitches as short as 50 nsec. This continuous roll mode also stores events like motion profiles, UPS, power supply and motor start-ups. And the 100X zoom your can look at the smallest of details, like individual power cycles. Two of these 27,500 point recordings can be stored for later analysis.

Advanced trigger modes

A wide choice of automatic and manual trigger modes gives you the flexibility to capture just about any signal you'll encounter. Connect-and-View triggering is ideal for fast and easy checking of multiple testpoints. The manual modes include time delay, video and pulse-width triggering. A fully isolated external trigger input is included for troubleshooting time relationships between two input signals synchronized to a third signal.

Analysis Power

For analysis of waveforms, ScopeRecord™ and TrendPlot™ recordings, the ScopeMeter features 24 automatic measurements, cursors, zoom and a real-time clock. The analysis can be made directly or later when back at the office. Up to 2 recordings and 10 scope screens can be stored for analysis, printout or download to a PC.

Use TrendPlot™ to help find intermittents, fast

The toughest faults to find are those once-in-a-while intermittents. They can be caused by bad connections, dust, dirt, corrosion or simply broken wiring or connections. Other factors, like line outages and sags, or the starting and stopping of a motor can also cause a machine to stop. You may not be around to see it - Fluke's ScopeMeter will. In this "paperless recorder" mode, you can plot the minimum and maximum peak values and average over time - up to 16 days. The two inputs can plot any combination of volts, amps, temperature, frequency and phase, with time and date stamp, to help lead you to the cause of those faults quickly.

Measure from mV to kV

The ScopeMeter 190 Series with three independently floating isolated inputs is safety certified for measurements in 1000V CAT II and 600V CAT III environments. And the standard probes cover a wide application range from mV to kV, making the ScopeMeter 190 ideal for micro electronics to electrical power applications.

A versatile test-tool

Just like the industrial ScopeMeter 123, the ScopeMeter 190 is a three-in-one instrument incorporating a scope, multimeter and paperless recorder. The rechargeable NiMH battery provides four hours of continuous operation, and takes just four hours to recharge. Battery saving and auto power down functions take you easily through the working day.

ScopeMeter^® 190 Series
Specifications

• Oscilloscope Mode
  
• Meter Mode
  
• Recorder Mode
  
• General Specifications
  

  Oscilloscope Mode
  Vertical Deflection	Bandwidth: Fluke 199= 200 MHz Fluke 196= 100 MHz Fluke 192= 60 MHz Rise time: Fluke 199= 1.7 ns Fluke 196= 3.5 ns Fluke 192= 5.8 ns Bandwidth limiter: User selectable 10 kHz or 20 MHz Number of inputs: 2 plus external trigger. All isolated from each other and ground. Input coupling: AC, DC with ground level indicator Input sensitivity: 5 mV/div to100 V/div Input voltage: See general specifications for maximum rating Vertical resolution: 8 bit Accuracy: ±(1.5% of reading + 0.04 x range/div) Input impedance: 1 MW ± 1% // 15 pF ± 2 pF
  Horizontal	Maximum real-time sample rate: Fluke 199= 2.5 GS/s Fluke 196= 1 GS/s Fluke 192= 500 MS/s Number of digitizers: 2 Time base range: Fluke 199 and 196= 5 ns/div to 5 s/div Fluke 192= 10 ns/div to 5 s/div Maximum record length: 1,000 points per input 27,500 points per input in ScopeRecord™-roll mode (10 ms/div ... 2 min/div) Accuracy: ± (0.01% of reading + 1 pixel) Glitch capture: 50 nsec (5 µsec/div to 1 min/div) Faster time bases have higher sample rates than 20 MS/s
  Display and acquisition	Display modes: Input A, input B, dual, average, persistence, invert, replay Acquisition modes: Normal, auto, single shot, ScopeRecord™, roll, glitch capture
  Trigger and delay	Source: Input A, input B, external trigger input. All input references isolated from each other and ground. Modes: Automatic Connect-and-View™, free run, single shot, edge, delay, video, video line, selectable pulse width Connect-and-View™: Advanced automatic triggering that recognizes signal patterns, automatically sets up and continuously adjusts triggering, time base and amplitude. Automatically displays stable waveforms of complex and dynamic signals like motor drive and control signals. Video triggering: NTSC, PAL, PAL+, SECAM. Includes field 1 and 2 and line select. Pulse width triggering: Pulse width qualified by time. Allows for triggering t, = t, ¹ t, where t is selectable in minimal steps of 0.01 div or 50 nsec. Time delay: 9 divisions pre-trigger view to 1,000 divisions trigger delay
  Automatic capture of 100 screens	The instrument ALWAYS memorizes last 100 screens (no user interaction or setup required). When an anomaly occurs on screen, there’s 10 seconds to press HOLD and review it. If one sets up the instrument for triggering on glitches or intermittent anomalies the unit operates in “baby-sit” mode and will capture 100 events. Replay: Manual or continuous replay. Displays the captured 100 screens as a “live” animation. The contents can also be viewed by manually scrolling backwards and forwards “screen by screen”. Replay storage: Up to 2 sets of 100 screens can be saved for later recall and analysis.
  Automatic scope measurements	VDC, VAC rms, VAC+DC, Vpeak max, Vpeak min, Vpeak to peak, frequency (Hz), positive pulse width, negative pulse width, positive duty cycle, negative duty cycle, amp AC, amp DC, amp AC+DC, power factor, watts, VA, VA reactive, phase, temperature °C, temperature °F, dBV, dBm into 50W and 600W
  Cursor Measurements	Source: Input A or B Dual horizontal lines: Voltage at cursor 1 and 2, voltage between cursors Dual vertical lines: Time between cursors, voltage between markers Single vertical line: Min-Max and Average voltage at cursor position
  Zoom	Up to 8x horizontal zoom

  
  
  

  Meter Mode
  General	Via 4 mm banana inputs. Fully isolated from scope inputs and scope ground. The specified accuracy is valid over the temperature range 18 °C to 28 °C (15 °F to 33 °F). Add 10 % of specified accuracy for each degree °C below 18 °C or above 28 °C (15 °F to 33 °F).
  Maximum resolution	5,000 counts
  Voltmeter ranges	500mV, 5V, 50V, 500V, 1,000V
  Accuracy	VDC: ± (0.5 % + 5 counts) VAC true rms 15 Hz to 60 Hz: ± (1 % + 10 counts) 60 Hz to 1 kHz: ± (2.5 % + 15 counts) VAC+DC true rms DC to 60 Hz: ± (1 % + 10 counts) 60 Hz to 1 kHz: ± (2.5 % + 15 counts)
  Ohms	Ranges: 500W, 5kW, 50kW, 500kW, 5MW, 30MW Accuracy: ± (0.6 % + 5 counts)
  Other meter functions	Continuity: Beeper on < 30W (± 10W) Diode test: Up to 2.8V Amps: Amp DC, Amp AC, Amp AC+DC using an optional current clamp or shunt. Scaling factors: 0.1 mV/Amp to 100 V/Amp Temperature (°C, °F): With optional accessories. Scale factors 1 mV/°C or 1 mV/°F Input impedance: 1 MW ± 1% // 10 pF ± 2 pF Advanced meter functions: Auto/manual ranging, relative measurements (Zero reference), TrendPlot recording

  
  
  

  Recorder Mode
  ScopeRecord-roll mode	Dual input waveform storage mode. Source and display: Input A, Input B, Dual Memory depth: 27,500 points per input. Each point consist of Min-Max pair. Min-Max values: Min-Max values are measured at high sample rate ensuring capture and display of glitches Sample Recording Settings: Set Time base range = 10 ms/div to 1 min/div: Recorded timespan: 11 sec to 15 hrs Glitch capture: 50 nsec Sample rate: 20 MS/s Resolution: 400 µsec to 2 sec Set Time base range = 2 min/div: Recorded timespan: 30 hrs Glitch capture: 250 nsec Sample rate: 4 MS/s Resolution: 4 sec Recording modes: Single sweep, continuous roll, start on external trigger Horizontal scale: Time from start, time of day Zoom: Up to 100 x zoom Memory: Up to 2 dual input ScopeRecordings can be saved for later recall and analysis
  TrendPlot™ Recording	Dual input electronic paperless chart recorder. Plots, displays and stores meter and scope measurements. Source and display: Input A, Input B and DMM input Memory depth: 13,500 points record per input. Per record point a minimum, maximum and average value, and a time and date stamp are stored. Ranges: 10 s/div to 20 min/div in normal view mode. 10 min/div to 24 hour/div in view-all mode (overview of total record) Recorded timespan: Up to 8 days with a resolution of 1 minute Recording mode: Continuous roll Measurement speed: 2.5 measurements per second maximum Horizontal scale: Time from start, time of day Zoom: Up to 64x zoom Memory: Up to 2 TrendPlot recordings can be saved for later recall and analysis
  Cursor measurements - All Recorder Modes	Source: Input A, B or DMM input Dual vertical lines: Min-Max or Average voltage. Time between cursors. Single vertical line: Min-Max or Average voltage. Absolute date and time or time from start.

  
  
  

  General Specifications
  Case	Design: Rugged, shock proof with integrated protective holster Drip and dust proof: IP51 according to IEC529 Shock and vibration: Shock 30g, Vibration 3g according to MIL-T28800E, Type III, Class 3, Style B
  Display	Bright LCD with CCFL backlight, 35/60 cd/m2 without/with power adapter. Size: 105 x 79 mm (4.1 x 3.1 inches) Resolution: 240 x 240 pixels Contrast and brightness: User adjustable, temperature compensated
  Memory Save and Recall	Scope memories: 10 memory locations that each can contain two waveforms plus corresponding setup. Recorder memories: 2 memory locations that each can contain 100 captured dual input scope screens, or a dual input ScopeRecord (27,500 Min-Max pairs per input), or a dual input Trendplot (13,500 Min-Max pairs per input).
  Real-time Clock	Time and date stamp for ScopeRecord, 100 captured screens and Trendplots.
  Power	Line power: Country specific line voltage adapter/battery charger included Battery power: Rechargeable NiMH (installed) Battery operating time: 4 hours Battery charging time: 4 hours Battery power saving functions: Auto power down with adjustable power down time. On screen battery power indicator
  Mechanical data	Size: 256 x 169 x 64 mm (10.1 x 6.6 x 2.5 inches) Weight: 1.95 kg (4.3 lbs)
  Safety	Compliance: EN61010-1 (1993) Pollution degree 2, UL 3111-1 (1994), CAN/CSA C22.2 No.1010.1 (1992), ANSI/ISA S82.01 (1994)
  Input voltage ratings	Maximum probe voltage: 1,000V CAT II, 600V CAT III (Maximum voltage between 10:1 probe tip (VP190) and reference lead) Floating voltage: 1,000V CAT II, 600V CAT III (Maximum voltage between earth ground and any terminal (signal input or shielding)) Independently isolated: 1,000V CAT II, 600V CAT III inputs (Maximum voltage between any terminal of one input or probe (VP190) and any other terminal of another input or probe (VP190)) Maximum voltage on BNC input directly (input A or B): 300V CAT III Maximum voltage on meter input: 1,000V CAT II, 600V CAT III
  Environmental	Operating temperature: 0 °C to +50 °C Storage temperature: -20 °C to +60 °C Humidity 10 °C to 30 °C: 95% RH non condensing 30 °C to 40 °C: 75% RH non condensing 40 °C to 50 °C: 45% RH non condensing Maximum operating altitude: 3,000 m (10,000 feet) Maximum storage altitude: 12 km (40,000 feet) Electro-Magnetic Compatibility: EN 61326-1 for emission and immunity
  Optically isolated PC/Printer interface	To printer: Supports HP Laserjet®,Deskjet®,Epson FX/LQ® and postscript printers via optional PAC 91 To PC: Transfer instrument settings, screen images and waveform data, compatible with FlukeView®software for Windows® via optional PM9080.
  Warranty	3 years

Available Accessories and Options

TO ORDER ACCESSORIES CLICK HERE